Sewage Ejector Pump: 1/2 hp, 2/5 in Max. Dia. Solids, Continuous Duty, 120V AC, Titanium, TM
In Stock
$2,402.00
/each
Earn 2402 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
TSURUMI Sewage Ejector Pump: 1/2 hp, 2/5 in Max. Dia....
Item 20LR14
$2,402.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2508 |
| Brand | TSURUMI |
| Series | TM |
| Discharge | 2 in MNPT |
| Volute Material | Resin |
| Flow Rate - Maximum | 79 gpm |
| Flow Rate @ 10 ft of Head | 72 gpm |
| Frequency | 60 Hz |
| Cord Length | 32 ft |
| For Media Type | Salt Water |
| Manufacturer Warranty Length | 2 yr |
| Horsepower | 1/2 hp |
| Motor Housing Material | Titanium |
| Phase | Single |
| Power Source | Corded Electric |
| Depth Pumped - Minimum | 5 in |
| Switch Actuation | No Switch Included |
| Impeller Material | Glass Fiber Reinforced Plastic |
| Max. Media Temp. | 104 Degrees F |
| Rated Voltage | 120V AC |
| Solids Diameter - Maximum | 2/5 in |
| Duty Cycle | Continuous |
| Standards | UL 778 |
| Feet of Head - Maximum | 43 ft |
| Mfr. Model # | 50TM2.4S-63 (115V) |
| Country of Origin | Japan (subject to change) |
| UNSPSC | 40151513 |
Description
Sewage Ejector Pump, HP 1/2, Rated Voltage 120V AC, Phase - Pumps 1, Amps 5.80 A, Switch Actuation No Switch Included, On Point 4 1/2 in, Off Point 516 in, Body Material Titanium, Impeller Material Glass Fiber Reinforced Plastic, Shaft Seal Material - Pumps Silicone Carbide, Flow Rate @ 10 Ft. of Head 72 gpm, Flow Rate @ 15 Ft. of Head 62 gpm, Flow Rate @ 20 Ft. of Head 52 gpm, Max. Head 43 ft, Min. Sump Pit Dia. 8 in, Body Dia. 9 5/16 in, Width at Widest Point 9 3/8 in, Overall Height 14 1/4 in