HDPE Sheet: 0.1875 in Thick, 12 in x 4 ft, Opaque, Black, 4, 600 psi Tensile Strength, 1.94 ft-lb/in
In Stock
$29.70
Save 11%
$26.37
/each
Earn 26 points for this item
($0.26 for your next purchase!)
REGISTER NOW TO EARN!
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR HDPE Sheet: 0.1875 in Thick, 12 in x 4 ft, Op...
Mfr # 1ZAX4
$26.37
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2095 |
| Brand | APPROVED VENDOR |
| Dielectric Strength | 50 kV/mm |
| UV-Resistant | UV-Resistant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Coefficient of Thermal Expansion | 0.55 x 10^-5 in/in/ Degrees F |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Wear Rate | 6.53 x 10^-6 cu mm/N-m |
| Minimum Temperature | -40 Degrees F |
| Machinability | 80 % |
| Friction Coefficient | 0.2 |
| Impact Strength | 1.94 ft-lb/in |
| Plastic Clarity | Opaque |
| Standards | Dept of Canadian Agriculture, ASTM D2239, USDA |
| Minimum Adhesive Temperature | 70 Degrees F |
| Light Transmission | 90 % |
| Shore Hardness | 70 Shore D |
| Tensile Strength | 4,600 psi |
| Plastic Width | 12 in |
| Metal Detectable | Not Metal Detectable |
| Maximum Temperature | 180 Degrees F |
| Material | HDPE |
| Maximum Adhesive Temperature | 203 Degrees F |
| Plastic Thickness | 0.1875 in |
| Temperature Range | -40 Degrees F to 180 Degrees F |
| Plastic Length | 4 ft |
| FDA Compliance | 21 CFR 177.1520 |
| Rockwell Hardness | 64 HRM |
| Flexural Modulus | 174 ksi |
| Fabrication | Extruded |
| Color | Black |
| Water Absorption | 0.01 % |
| Scratch-Resistant | Scratch-Resistant |
| Static-Resistant | Not Static-Resistant |
| Mfr. Model # | 1ZAX4 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 13102017 |
Description
HDPE Sheet, HDPE, Grade Standard, Plastic Length 4 ft, Plastic Width 12 in, Plastic Thickness 0.1875 in, Black, Plastic Clarity Opaque, Tensile Strength 4,600 psi, Impact Strength 1.94 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.01 Percent, Temperature Range -58 Degrees to 176 Degrees F, Plastic Density 0.93 g/cc, Plastic Hardness 70D