LDPE Sheet: 0.75 in Thick, 12 in x 24 in, Opaque, Off-White, 1, 700 psi Tensile Strength, No Break
In Stock
$139.85
/each
Earn 139 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR LDPE Sheet: 0.75 in Thick, 12 in x 24 in, Opa...
Item 1YZW3
$139.85
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Metal Detectable | Not Metal Detectable |
| Shore Hardness | 50 Shore D |
| Flexural Modulus | 335 MPa |
| Plastic Thickness | 0.75 in |
| Water Absorption | 0.01 % |
| Rockwell Hardness | 105 HRM |
| Plastic Length | 24 in |
| Impact Strength | No Break |
| Static-Resistant | Not Static-Resistant |
| Maximum Adhesive Temperature | 176 Degrees F |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Temperature Range | -58 Degrees F to 160 Degrees F |
| Tensile Strength | 1,700 psi |
| Light Transmission | 44 % |
| Scratch-Resistant | Not Scratch-Resistant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Friction Coefficient | 0.12 |
| Fabrication | Extruded |
| Standards | Dept of Canadian Agriculture, USDA/ASTM D4635-16/ASTM D1238, FDA 21 CFR 177.52 |
| UV-Resistant | Not UV-Resistant |
| Plastic Clarity | Opaque |
| FDA Compliance | 21 CFR 177.1520 |
| Plastic Width | 12 in |
| Material | LDPE |
| Tensile Strength Rating | Poor (0 to 4,999 psi) |
| Dielectric Strength | 16.8 kV/mil |
| Color | Off-White |
| Minimum Adhesive Temperature | 65 Degrees F |
| Coefficient of Thermal Expansion | 3 x 10^-5 in/in/ Degrees F |
| Machinability | 85 % |
| Mfr. Model # | 1YZW3 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 13102018 |
Description
LDPE Sheet, LDPE, Grade Standard, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.75 in, Off-White, Plastic Clarity Opaque, Tensile Strength 1,700 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -58 Degrees to 160 Degrees F, Plastic Density 0.91 g/cc, Plastic Hardness 54D