Plug-In Utility Pump: 1 hp, 120V AC, 82 gpm Flow Rate @ 10' of Head, 3/8 in Max. Dia. Solids
In Stock
$1,311.00
/each
Earn 1311 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
DAYTON Plug-In Utility Pump: 1 hp, 120V AC, 82 gpm F...
Item 1XHV5
$1,311.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2516 |
| Brand | DAYTON |
| Hazardous Location Class | Not Rated |
| Current | 11.3 A |
| Gauge/Conductor | 14/3 |
| Sump Pit Diameter - Minimum | 18 in |
| Feet of Head - Maximum | 49 ft |
| Horsepower | 1 hp |
| Liquid Temperature - Maximum | 104 Degrees F |
| Shaft Seal Material | Carbon/Ceramic/Viton |
| Manufacturers Warranty Length | 1 yr |
| For Industry | Residential, Commercial |
| NEC Cord Designation | SJTW |
| Switch Electrical Connection | No Switch Included |
| Impeller Design | Open |
| Impeller Material | Stainless Steel |
| For Media Type | Mine Acid Water, White Liquor, Hydrogen Peroxide, Salt Water, Lubricant, Plant Based Oil, Deionized Water, Stoddard Solvent, Clear Water, Glycerine, White Water, Detergent, Coolant, Formaldehyde, Grey Water |
| Motor Housing Material | Stainless Steel |
| Standards | CSA |
| Phase | Single |
| Shaft Seal Type | Double Mechanical |
| Thermal Protection | Auto |
| Frequency | 60 Hz |
| Cord Length | 20 ft |
| Series | Pro Series |
| Duty Cycle | Continuous |
| Switch Actuation | No Switch Included |
| Volute Material | Cast Iron |
| Rated Voltage | 120V AC |
| Flow Rate @ 10 ft of Head | 82 gpm |
| Power Source | Corded Electric |
| Solids Diameter - Maximum | 3/8 in |
| Discharge | 2 in FNPT |
| Mfr. Model # | 1XHV5 |
| Country of Origin | Taiwan (subject to change) |
| UNSPSC | 40151564 |
Description
Plug-In Utility Pump, HP 1, Phase - Pumps 1, Rated Voltage 120V AC, Hz 60, Amps 11.3 AC, Switch Actuation No Switch Included, Switch Electrical Connection No Switch Included, Off Point Not Applicable, On Point Not Applicable, Body Material Stainless Steel, Impeller Material Stainless Steel, Shaft Seal Material - Pumps Carbon, Ceramic, Viton, Flow Rate @ 5 Ft. of Head 90 gpm, Flow Rate @ 10 Ft. of Head 82 gpm, Flow Rate @ 15 Ft. of Head 69 gpm, Flow Rate @ 20 Ft. of Head 61 gpm, Max. Head 49 ft