Plug-In Utility Pump: 1/2 hp, 120V AC, 64 gpm Flow Rate @ 10' of Head, 2 in FNPT, Dewatering
In Stock
$755.50
/each
Earn 755 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
DAYTON Plug-In Utility Pump: 1/2 hp, 120V AC, 64 gpm...
Item 1XHV4
$755.50
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2516 |
| Brand | DAYTON |
| Gauge/Conductor | 14/3 |
| For Media Type | Mine Acid Water, White Liquor, Hydrogen Peroxide, Salt Water, Lubricant, Plant Based Oil, Deionized Water, Stoddard Solvent, Clear Water, Glycerine, White Water, Detergent, Formaldehyde, Coolant, Grey Water |
| Manufacturers Warranty Length | 1 yr |
| Shaft Seal Material | Carbon/Ceramic/Viton |
| Solids Diameter - Maximum | 1/4 in |
| Motor Housing Material | Stainless Steel |
| Current | 4.7 AC |
| Switch Electrical Connection | No Switch Included |
| Impeller Material | Stainless Steel |
| Liquid Temperature - Maximum | 104 Degrees F |
| Hazardous Location Class | Not Rated |
| Duty Cycle | Continuous |
| Series | Pro Series |
| Standards | CSA |
| Cord Length | 20 ft |
| Phase | Single |
| Switch Actuation | No Switch Included |
| Thermal Protection | Auto |
| Feet of Head - Maximum | 36 ft |
| Frequency | 60 Hz |
| Volute Material | Cast Iron |
| Sump Pit Diameter - Minimum | 18 in |
| Shaft Seal Type | Double Mechanical |
| NEC Cord Designation | SJTW |
| Power Source | Corded Electric |
| Flow Rate @ 10 ft of Head | 64 gpm |
| Discharge | 2 in FNPT |
| Impeller Design | Open |
| For Industry | Residential, Commercial |
| Horsepower | 1/2 hp |
| Rated Voltage | 120V AC |
| Mfr. Model # | 1XHV4 |
| Country of Origin | Taiwan (subject to change) |
| UNSPSC | 40151564 |
Description
Plug-In Utility Pump, HP 1/2, Phase - Pumps 1, Rated Voltage 120V AC, Hz 60, Amps 4.7 AC, Switch Actuation No Switch Included, Switch Electrical Connection No Switch Included, Off Point Not Applicable, On Point Not Applicable, Body Material Stainless Steel, Impeller Material Stainless Steel, Shaft Seal Material - Pumps Carbon, Ceramic, Viton, Flow Rate @ 5 Ft. of Head 74 gpm, Flow Rate @ 10 Ft. of Head 64 gpm, Flow Rate @ 15 Ft. of Head 51 gpm, Flow Rate @ 20 Ft. of Head 40 gpm, Max. Head 36 ft