Polyethylene Sheet: 2.5 in Thick, 24 in x 24 in, Opaque, White, 5, 800 psi Tensile Strength, No Break
In Stock
$775.50
/each
Earn 775 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 2.5 in Thick, 24 in x 24...
Item 1UWC7
$775.50
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Color | White |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Friction Coefficient | 0.12 |
| Scratch-Resistant | Not Scratch-Resistant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Plastic Clarity | Opaque |
| Metal Detectable | Not Metal Detectable |
| Machinability | 100 % |
| Dielectric Strength | 45 kV/mm |
| Plastic Thickness | 2.5 in |
| Backing Type | No Backing |
| Material | UHMW Polyethylene |
| UV-Resistant | Not UV-Resistant |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Shore Hardness | 70 Shore D |
| Water Absorption | 0.01 % |
| Static-Resistant | Not Static-Resistant |
| Flexural Modulus | 400 MPa |
| Impact Strength | No Break |
| Plastic Length | 24 in |
| Minimum Temperature | -22 Degrees F |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Rockwell Hardness | 50 HRM |
| Tensile Strength | 5,800 psi |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Standards | FDA, USDA, 3-A Dairy |
| Plastic Width | 24 in |
| Wear Rate | Not Rated |
| Maximum Temperature | 180 Degrees F |
| Elongation | 200 % |
| Mfr. Model # | BULK-PS-UHMW-462 |
| Country of Origin | China (subject to change) |
| UNSPSC | 13102015 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 24 in, Plastic Width 24 in, Plastic Thickness 2.5 in, White, Plastic Clarity Opaque, Tensile Strength 5,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 66D