Polyethylene Sheet: 2.25 in Thick, 24 in x 24 in, Opaque, White, 5, 800 psi Tensile Strength
In Stock
$872.50
/each
Earn 872 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 2.25 in Thick, 24 in x 24...
Item 1UWC6
$872.50
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Material | UHMW Polyethylene |
| Shore Hardness | 70 Shore D |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Water Absorption | 0.01 % |
| Plastic Thickness | 2.25 in |
| Flexural Modulus | 400 MPa |
| Plastic Clarity | Opaque |
| Scratch-Resistant | Not Scratch-Resistant |
| Elongation | 200 % |
| Backing Type | No Backing |
| Standards | FDA, USDA, 3-A Dairy |
| Friction Coefficient | 0.12 |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Impact Strength | No Break |
| UV-Resistant | Not UV-Resistant |
| Maximum Temperature | 180 Degrees F |
| Plastic Length | 24 in |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Dielectric Strength | 45 kV/mm |
| Color | White |
| Wear Rate | Not Rated |
| Plastic Width | 24 in |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Minimum Temperature | -22 Degrees F |
| Rockwell Hardness | 50 HRM |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Machinability | 100 % |
| Static-Resistant | Not Static-Resistant |
| Tensile Strength | 5,800 psi |
| Metal Detectable | Not Metal Detectable |
| Mfr. Model # | BULK-PS-UHMW-957 |
| Country of Origin | China (subject to change) |
| UNSPSC | 13102015 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 24 in, Plastic Width 24 in, Plastic Thickness 2.25 in, White, Plastic Clarity Opaque, Tensile Strength 5,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 66D