Polyethylene Sheet: 1.75 in Thick, 24 in x 24 in, Opaque, White, 5, 800 psi Tensile Strength
In Stock
$665.00
/each
Earn 665 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 1.75 in Thick, 24 in x 24...
Item 1UWC4
$665.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Minimum Temperature | -22 Degrees F |
| Impact Strength | No Break |
| Water Absorption | 0.01 % |
| Maximum Temperature | 180 Degrees F |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Shore Hardness | 70 Shore D |
| Plastic Thickness | 1.75 in |
| Friction Coefficient | 0.12 |
| Static-Resistant | Not Static-Resistant |
| Wear Rate | Not Rated |
| Scratch-Resistant | Not Scratch-Resistant |
| Plastic Width | 24 in |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Elongation | 200 % |
| Metal Detectable | Not Metal Detectable |
| Rockwell Hardness | 50 HRM |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Material | UHMW Polyethylene |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Tensile Strength | 5,800 psi |
| Color | White |
| Standards | FDA, USDA, 3-A Dairy |
| Machinability | 100 % |
| Plastic Clarity | Opaque |
| Backing Type | No Backing |
| Dielectric Strength | 45 kV/mm |
| UV-Resistant | Not UV-Resistant |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Flexural Modulus | 400 MPa |
| Plastic Length | 24 in |
| Mfr. Model # | BULK-PS-UHMW-953 |
| Country of Origin | China (subject to change) |
| UNSPSC | 13102015 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 24 in, Plastic Width 24 in, Plastic Thickness 1.75 in, White, Plastic Clarity Opaque, Tensile Strength 5,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 66D