Polyethylene Sheet: 1.5 in Thick, 24 in x 24 in, Opaque, White, 5, 800 psi Tensile Strength, No Break
In Stock
$463.00
/each
Earn 463 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 1.5 in Thick, 24 in x 24...
Item 1UWC3
$463.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Backing Type | No Backing |
| Dielectric Strength | 45 kV/mm |
| Water Absorption | 0.01 % |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Shore Hardness | 70 Shore D |
| Plastic Thickness | 1.5 in |
| Maximum Temperature | 180 Degrees F |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Plastic Clarity | Opaque |
| Wear Rate | Not Rated |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Minimum Temperature | -22 Degrees F |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Scratch-Resistant | Not Scratch-Resistant |
| Friction Coefficient | 0.12 |
| Color | White |
| Plastic Length | 24 in |
| Elongation | 200 % |
| Plastic Width | 24 in |
| Static-Resistant | Not Static-Resistant |
| Material | UHMW Polyethylene |
| Flexural Modulus | 400 MPa |
| UV-Resistant | Not UV-Resistant |
| Machinability | 100 % |
| Standards | FDA, USDA, 3-A Dairy |
| Rockwell Hardness | 50 HRM |
| Metal Detectable | Not Metal Detectable |
| Tensile Strength | 5,800 psi |
| Impact Strength | No Break |
| Mfr. Model # | BULK-PS-UHMW-49 |
| Country of Origin | China (subject to change) |
| UNSPSC | 13102015 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 24 in, Plastic Width 24 in, Plastic Thickness 1.5 in, White, Plastic Clarity Opaque, Tensile Strength 5,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 66D