Polyethylene Sheet: 0.5 in Thick, 24 in x 24 in, Opaque, White, 5, 800 psi Tensile Strength, No Break
In Stock
$142.60
/each
Earn 142 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.5 in Thick, 24 in x 24...
Item 1UWB9
$142.60
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Maximum Temperature | 180 Degrees F |
| Minimum Temperature | -22 Degrees F |
| Plastic Thickness | 0.5 in |
| Scratch-Resistant | Not Scratch-Resistant |
| Plastic Length | 24 in |
| Plastic Width | 24 in |
| Tensile Strength | 5,800 psi |
| Standards | FDA, USDA, 3-A Dairy |
| Elongation | 200 % |
| Color | White |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Impact Strength | No Break |
| Friction Coefficient | 0.12 |
| Shore Hardness | 70 Shore D |
| Static-Resistant | Not Static-Resistant |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Material | UHMW Polyethylene |
| UV-Resistant | Not UV-Resistant |
| Rockwell Hardness | 50 HRM |
| Plastic Clarity | Opaque |
| Machinability | 100 % |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Flexural Modulus | 400 MPa |
| Metal Detectable | Not Metal Detectable |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Water Absorption | 0.01 % |
| Backing Type | No Backing |
| Dielectric Strength | 45 kV/mm |
| Wear Rate | Not Rated |
| Mfr. Model # | BULK-PS-UHMW-46 |
| Country of Origin | China (subject to change) |
| UNSPSC | 13102015 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 24 in, Plastic Width 24 in, Plastic Thickness 0.5 in, White, Plastic Clarity Opaque, Tensile Strength 5,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 66D