Polyethylene Sheet: 0.375 in Thick, 24 in x 24 in, Opaque, White, 5, 800 psi Tensile Strength
In Stock
$116.00
/each
Earn 116 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.375 in Thick, 24 in x 2...
Item 1UWB8
$116.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Minimum Temperature | -22 Degrees F |
| Machinability | 100 % |
| Plastic Length | 24 in |
| Tensile Strength | 5,800 psi |
| Metal Detectable | Not Metal Detectable |
| Scratch-Resistant | Not Scratch-Resistant |
| Material | UHMW Polyethylene |
| Color | White |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Water Absorption | 0.01 % |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Elongation | 200 % |
| Plastic Clarity | Opaque |
| Shore Hardness | 70 Shore D |
| Plastic Thickness | 0.375 in |
| Standards | FDA, USDA, 3-A Dairy |
| Backing Type | No Backing |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Impact Strength | No Break |
| Maximum Temperature | 180 Degrees F |
| UV-Resistant | Not UV-Resistant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Static-Resistant | Not Static-Resistant |
| Wear Rate | Not Rated |
| Friction Coefficient | 0.12 |
| Rockwell Hardness | 50 HRM |
| Dielectric Strength | 45 kV/mm |
| Plastic Width | 24 in |
| Flexural Modulus | 400 MPa |
| Mfr. Model # | BULK-PS-UHMW-45 |
| Country of Origin | China (subject to change) |
| UNSPSC | 13102015 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 24 in, Plastic Width 24 in, Plastic Thickness 0.375 in, White, Plastic Clarity Opaque, Tensile Strength 5,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 66D