Polyethylene Sheet: 2.25 in Thick, 12 in x 24 in, Opaque, White, 5, 800 psi Tensile Strength
In Stock
$440.75
/each
Earn 440 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 2.25 in Thick, 12 in x 24...
Item 1UWA3
$440.75
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Color | White |
| Plastic Thickness | 2.25 in |
| Dielectric Strength | 45 kV/mm |
| Elongation | 200 % |
| Minimum Temperature | -22 Degrees F |
| Material | UHMW Polyethylene |
| Plastic Length | 24 in |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Water Absorption | 0.01 % |
| Plastic Clarity | Opaque |
| Maximum Temperature | 180 Degrees F |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Metal Detectable | Not Metal Detectable |
| Plastic Width | 12 in |
| Shore Hardness | 70 Shore D |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Friction Coefficient | 0.12 |
| Static-Resistant | Not Static-Resistant |
| UV-Resistant | Not UV-Resistant |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Wear Rate | Not Rated |
| Impact Strength | No Break |
| Rockwell Hardness | 50 HRM |
| Standards | FDA, USDA, 3-A Dairy |
| Tensile Strength | 5,800 psi |
| Machinability | 100 % |
| Backing Type | No Backing |
| Scratch-Resistant | Not Scratch-Resistant |
| Flexural Modulus | 400 MPa |
| Mfr. Model # | BULK-PS-UHMW-956 |
| Country of Origin | China (subject to change) |
| UNSPSC | 13102015 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 2.25 in, White, Plastic Clarity Opaque, Tensile Strength 5,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 66D