Polyethylene Sheet: 1.75 in Thick, 12 in x 24 in, Opaque, White, 5, 800 psi Tensile Strength
In Stock
$332.50
/each
Earn 332 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 1.75 in Thick, 12 in x 24...
Item 1UWA1
$332.50
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Impact Strength | No Break |
| Plastic Clarity | Opaque |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Color | White |
| Metal Detectable | Not Metal Detectable |
| Rockwell Hardness | 50 HRM |
| Dielectric Strength | 45 kV/mm |
| Shore Hardness | 70 Shore D |
| Scratch-Resistant | Not Scratch-Resistant |
| Wear Rate | Not Rated |
| Machinability | 100 % |
| UV-Resistant | Not UV-Resistant |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Minimum Temperature | -22 Degrees F |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Tensile Strength | 5,800 psi |
| Flexural Modulus | 400 MPa |
| Maximum Temperature | 180 Degrees F |
| Plastic Thickness | 1.75 in |
| Water Absorption | 0.01 % |
| Static-Resistant | Not Static-Resistant |
| Elongation | 200 % |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Material | UHMW Polyethylene |
| Standards | FDA, USDA, 3-A Dairy |
| Plastic Length | 24 in |
| Friction Coefficient | 0.12 |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Backing Type | No Backing |
| Plastic Width | 12 in |
| Mfr. Model # | BULK-PS-UHMW-952 |
| Country of Origin | China (subject to change) |
| UNSPSC | 13102015 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 1.75 in, White, Plastic Clarity Opaque, Tensile Strength 5,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 66D