Polyethylene Sheet: 1.5 in Thick, 12 in x 24 in, Opaque, White, 5, 800 psi Tensile Strength, No Break
In Stock
$213.75
/each
Earn 213 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 1.5 in Thick, 12 in x 24...
Item 1UVZ9
$213.75
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Elongation | 200 % |
| Tensile Strength | 5,800 psi |
| Shore Hardness | 70 Shore D |
| Water Absorption | 0.01 % |
| Plastic Length | 24 in |
| Material | UHMW Polyethylene |
| Metal Detectable | Not Metal Detectable |
| Dielectric Strength | 45 kV/mm |
| Rockwell Hardness | 50 HRM |
| Scratch-Resistant | Not Scratch-Resistant |
| Impact Strength | No Break |
| Plastic Thickness | 1.5 in |
| Static-Resistant | Not Static-Resistant |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Plastic Clarity | Opaque |
| Color | White |
| Friction Coefficient | 0.12 |
| Machinability | 100 % |
| Plastic Width | 12 in |
| Flexural Modulus | 400 MPa |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| UV-Resistant | Not UV-Resistant |
| Wear Rate | Not Rated |
| Backing Type | No Backing |
| Minimum Temperature | -22 Degrees F |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Standards | FDA, USDA, 3-A Dairy |
| Maximum Temperature | 180 Degrees F |
| Mfr. Model # | BULK-PS-UHMW-59 |
| Country of Origin | China (subject to change) |
| UNSPSC | 13102015 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 1.5 in, White, Plastic Clarity Opaque, Tensile Strength 5,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 66D