Polyethylene Sheet: 4.5 in Thick, 12 in x 12 in, Opaque, White, 5, 800 psi Tensile Strength, No Break
In Stock
$484.00
/each
Earn 484 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 4.5 in Thick, 12 in x 12...
Item 1UVX7
$484.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Rockwell Hardness | 50 HRM |
| Metal Detectable | Not Metal Detectable |
| Elongation | 200 % |
| Shore Hardness | 70 Shore D |
| Wear Rate | Not Rated |
| Machinability | 100 % |
| Backing Type | No Backing |
| Water Absorption | 0.01 % |
| Color | White |
| Dielectric Strength | 45 kV/mm |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Standards | FDA, USDA, 3-A Dairy |
| Maximum Temperature | 180 Degrees F |
| Plastic Width | 12 in |
| Tensile Strength | 5,800 psi |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Plastic Clarity | Opaque |
| UV-Resistant | Not UV-Resistant |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Flexural Modulus | 400 MPa |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Static-Resistant | Not Static-Resistant |
| Minimum Temperature | -22 Degrees F |
| Plastic Length | 12 in |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Plastic Thickness | 4.5 in |
| Impact Strength | No Break |
| Material | UHMW Polyethylene |
| Friction Coefficient | 0.12 |
| Scratch-Resistant | Not Scratch-Resistant |
| Mfr. Model # | BULK-PS-UHMW-965 |
| Country of Origin | China (subject to change) |
| UNSPSC | 13102015 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 4.5 in, White, Plastic Clarity Opaque, Tensile Strength 5,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 66D