Polyethylene Sheet: 3.5 in Thick, 12 in x 12 in, Opaque, White, 5, 800 psi Tensile Strength, No Break
In Stock
$366.50
/each
Earn 366 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 3.5 in Thick, 12 in x 12...
Item 1UVX5
$366.50
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Maximum Temperature | 180 Degrees F |
| Water Absorption | 0.01 % |
| Shore Hardness | 70 Shore D |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Plastic Clarity | Opaque |
| Minimum Temperature | -22 Degrees F |
| Friction Coefficient | 0.12 |
| Backing Type | No Backing |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Dielectric Strength | 45 kV/mm |
| Plastic Thickness | 3.5 in |
| Static-Resistant | Not Static-Resistant |
| Machinability | 100 % |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Scratch-Resistant | Not Scratch-Resistant |
| Standards | FDA, USDA, 3-A Dairy |
| Metal Detectable | Not Metal Detectable |
| Wear Rate | Not Rated |
| Material | UHMW Polyethylene |
| Color | White |
| UV-Resistant | Not UV-Resistant |
| Elongation | 200 % |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Rockwell Hardness | 50 HRM |
| Tensile Strength | 5,800 psi |
| Plastic Length | 12 in |
| Flexural Modulus | 400 MPa |
| Plastic Width | 12 in |
| Impact Strength | No Break |
| Mfr. Model # | BULK-PS-UHMW-963 |
| Country of Origin | China (subject to change) |
| UNSPSC | 13102015 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 3.5 in, White, Plastic Clarity Opaque, Tensile Strength 5,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 66D