Polyethylene Sheet: 2.25 in Thick, 12 in x 12 in, Opaque, White, 5, 800 psi Tensile Strength
In Stock
$215.00
/each
Earn 215 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 2.25 in Thick, 12 in x 12...
Item 1UVU9
$215.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Metal Detectable | Not Metal Detectable |
| Elongation | 200 % |
| Plastic Length | 12 in |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Color | White |
| Friction Coefficient | 0.12 |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Maximum Temperature | 180 Degrees F |
| Wear Rate | Not Rated |
| Plastic Width | 12 in |
| Minimum Temperature | -22 Degrees F |
| Machinability | 100 % |
| UV-Resistant | Not UV-Resistant |
| Tensile Strength | 5,800 psi |
| Material | UHMW Polyethylene |
| Static-Resistant | Not Static-Resistant |
| Impact Strength | No Break |
| Plastic Thickness | 2.25 in |
| Water Absorption | 0.01 % |
| Scratch-Resistant | Not Scratch-Resistant |
| Shore Hardness | 70 Shore D |
| Rockwell Hardness | 50 HRM |
| Plastic Clarity | Opaque |
| Flexural Modulus | 400 MPa |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Backing Type | No Backing |
| Dielectric Strength | 45 kV/mm |
| Standards | FDA, USDA, 3-A Dairy |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Mfr. Model # | BULK-PS-UHMW-955 |
| Country of Origin | China (subject to change) |
| UNSPSC | 13102015 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 2.25 in, White, Plastic Clarity Opaque, Tensile Strength 5,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 66D