Polyethylene Sheet: 1.75 in Thick, 12 in x 12 in, Opaque, White, 5, 800 psi Tensile Strength
In Stock
$170.00
/each
Earn 170 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 1.75 in Thick, 12 in x 12...
Item 1UVU7
$170.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Minimum Temperature | -22 Degrees F |
| Static-Resistant | Not Static-Resistant |
| Plastic Width | 12 in |
| Scratch-Resistant | Not Scratch-Resistant |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Shore Hardness | 70 Shore D |
| Material | UHMW Polyethylene |
| Tensile Strength | 5,800 psi |
| Plastic Length | 12 in |
| Elongation | 200 % |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Plastic Thickness | 1.75 in |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Maximum Temperature | 180 Degrees F |
| Color | White |
| UV-Resistant | Not UV-Resistant |
| Backing Type | No Backing |
| Friction Coefficient | 0.12 |
| Rockwell Hardness | 50 HRM |
| Flexural Modulus | 400 MPa |
| Impact Strength | No Break |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Machinability | 100 % |
| Metal Detectable | Not Metal Detectable |
| Plastic Clarity | Opaque |
| Water Absorption | 0.01 % |
| Dielectric Strength | 45 kV/mm |
| Standards | FDA, USDA, 3-A Dairy |
| Wear Rate | Not Rated |
| Mfr. Model # | BULK-PS-UHMW-951 |
| Country of Origin | China (subject to change) |
| UNSPSC | 13102015 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 1.75 in, White, Plastic Clarity Opaque, Tensile Strength 5,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 66D