Polyethylene Sheet: 1.5 in Thick, 12 in x 12 in, Opaque, White, 5, 800 psi Tensile Strength, No Break
In Stock
$124.65
/each
Earn 124 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 1.5 in Thick, 12 in x 12...
Item 1UVU6
$124.65
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Flexural Modulus | 400 MPa |
| Backing Type | No Backing |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Dielectric Strength | 45 kV/mm |
| Scratch-Resistant | Not Scratch-Resistant |
| Static-Resistant | Not Static-Resistant |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Maximum Temperature | 180 Degrees F |
| Machinability | 100 % |
| Minimum Temperature | -22 Degrees F |
| Rockwell Hardness | 50 HRM |
| UV-Resistant | Not UV-Resistant |
| Metal Detectable | Not Metal Detectable |
| Plastic Length | 12 in |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Plastic Clarity | Opaque |
| Color | White |
| Standards | FDA, USDA, 3-A Dairy |
| Elongation | 200 % |
| Impact Strength | No Break |
| Plastic Width | 12 in |
| Tensile Strength | 5,800 psi |
| Wear Rate | Not Rated |
| Material | UHMW Polyethylene |
| Plastic Thickness | 1.5 in |
| Shore Hardness | 70 Shore D |
| Friction Coefficient | 0.12 |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Water Absorption | 0.01 % |
| Mfr. Model # | BULK-PS-UHMW-69 |
| Country of Origin | China (subject to change) |
| UNSPSC | 13102015 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 1.5 in, White, Plastic Clarity Opaque, Tensile Strength 5,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 66D