Polyethylene Sheet: 0.375 in Thick, 12 in x 12 in, Opaque, White, 5, 800 psi Tensile Strength
In Stock
$36.65
/each
Earn 36 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.375 in Thick, 12 in x 1...
Item 1UVU2
$36.65
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Machinability | 100 % |
| Elongation | 200 % |
| Plastic Length | 12 in |
| Water Absorption | 0.01 % |
| Impact Strength | No Break |
| Maximum Temperature | 180 Degrees F |
| Plastic Thickness | 0.375 in |
| Dielectric Strength | 45 kV/mm |
| Plastic Width | 12 in |
| Wear Rate | Not Rated |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Rockwell Hardness | 50 HRM |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Plastic Clarity | Opaque |
| Static-Resistant | Not Static-Resistant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Color | White |
| Flexural Modulus | 400 MPa |
| Shore Hardness | 70 Shore D |
| UV-Resistant | Not UV-Resistant |
| Material | UHMW Polyethylene |
| Minimum Temperature | -22 Degrees F |
| Friction Coefficient | 0.12 |
| Metal Detectable | Not Metal Detectable |
| Backing Type | No Backing |
| Scratch-Resistant | Not Scratch-Resistant |
| Standards | FDA, USDA, 3-A Dairy |
| Tensile Strength | 5,800 psi |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Mfr. Model # | BULK-PS-UHMW-65 |
| Country of Origin | China (subject to change) |
| UNSPSC | 13102015 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.375 in, White, Plastic Clarity Opaque, Tensile Strength 5,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 66D