PETG Sheet: 0.1875 in Thick, 4 ft x 8 ft, Clear, Colorless, 7, 700 psi Tensile Strength, 1.2 ft-lb/in
In Stock
$313.00
/each
Earn 313 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR PETG Sheet: 0.1875 in Thick, 4 ft x 8 ft, Cle...
Item 1UTW1
$313.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2095 |
| Brand | APPROVED VENDOR |
| Machinability | 85 % |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Material | PETG |
| Fabrication | Extruded |
| Plastic Thickness | 0.1875 in |
| FDA Compliance | 21 CFR 177.1315 |
| Color | Colorless |
| Coefficient of Thermal Expansion | 66.8 x 10^-6 m/m Degrees C |
| Friction Coefficient | 0.25 |
| Water Absorption Rating | Good (0.05% to 0.25%) |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| UV-Resistant | UV-Resistant |
| Wear Rate | 1.96 x 10^-8 cu mm/N-m |
| Scratch-Resistant | Not Scratch-Resistant |
| Maximum Adhesive Temperature | 185 Degrees F |
| Metal Detectable | Not Metal Detectable |
| Static-Resistant | Not Static-Resistant |
| Elongation | 15 % |
| Minimum Adhesive Temperature | 122 Degrees F |
| Plastic Width | 4 ft |
| Water Absorption | 0.2 % |
| Rockwell Hardness | 115 HRR |
| Standards | JL C3DP/10993-5:2009 |
| Light Transmission | 86 % |
| Plastic Length | 8 ft |
| Plastic Clarity | Clear |
| Dielectric Strength | 410 V/mil |
| Flexural Modulus | 310,000 psi |
| Mfr. Model # | 1UTW1 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 13102020 |
Description
PETG Sheet, PETG, Grade Standard, Plastic Length 8 ft, Plastic Width 4 ft, Plastic Thickness 0.1875 in, Colorless, Plastic Clarity Clear, Tensile Strength 7,700 psi, Impact Strength 1.2 ft-lb/in, Friction Coefficient 0.25, Water Absorption 0.2 Percent, Temperature Range -40 Degrees to 153 Degrees F, Plastic Density 1.27 g/cc, Plastic Hardness Rockwell R115