Polyester Sheet: 3 in Thick, 12 in x 12 in, White, Opaque, 12, 400 psi Tensile Strength, 0.5 ft-lb/in
In Stock
$1,278.00
/each
Earn 1278 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyester Sheet: 3 in Thick, 12 in x 12 in, W...
Item 1URH3
$1,278.00
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Color | White |
| Fabrication | Extruded |
| Coefficient of Thermal Expansion | 0.33 x 10^-4/ Degrees F |
| Friction Coefficient | 0.2 |
| Impact Strength | 0.5 ft-lb/in |
| Machinability | 80 % |
| Metal Detectable | Not Metal Detectable |
| Water Absorption Rating | Good (0.051% to 0.25%) |
| Rockwell Hardness | 93 HRM |
| Wear Rate | 2.00 x 10^-6 cu mm/N-m |
| Standards | ASTM D4603 |
| Plastic Thickness | 3 in |
| Flexural Modulus | 490,000 psi |
| Material | Polyester |
| Shore Hardness | 82 Shore D |
| Tensile Strength | 12,400 psi |
| UV-Resistant | Not UV-Resistant |
| Water Absorption | 0.07 % |
| Maximum Adhesive Temperature | 210 Degrees F |
| Plastic Length | 12 in |
| Minimum Temperature | -30 Degrees F |
| Temperature Range | -30 Degrees F to 210 Degrees F |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Scratch-Resistant | Not Scratch-Resistant |
| Static-Resistant | Not Static-Resistant |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| Light Transmission | 80 % |
| Plastic Clarity | Opaque |
| Dielectric Strength | 385 V/mil |
| Maximum Temperature | 210 Degrees F |
| Plastic Width | 12 in |
| Minimum Adhesive Temperature | 176 Degrees F |
| Mfr. Model # | 1URH3 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 13102020 |
Description
Polyester Sheet, Polyester, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 3 in, White, Plastic Clarity Opaque, Tensile Strength 12,400 psi, Impact Strength 0.5 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.07 Percent, Temperature Range -40 Degrees to 210 Degrees F, Plastic Density 1.38 g/cc, Plastic Hardness Rockwell M101