Acrylic Sheet: 0.234375 in Thick, 4 ft x 8 ft, Gray, Opaque, 11, 030 psi Tensile Strength
In Stock
$470.50
/each
Earn 470 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Acrylic Sheet: 0.234375 in Thick, 4 ft x 8 ft...
Item 1URC9
$470.50
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2095 |
| Brand | APPROVED VENDOR |
| Friction Coefficient | 0.8 |
| Backing Type | No Backing |
| Material | Acrylic |
| Minimum Temperature | 32 Degrees F |
| Plastic Width | 4 ft |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Wear Rate | Not Rated |
| Color | Gray |
| Plastic Clarity | Opaque |
| Dielectric Strength | Not Rated |
| Fabrication | Cast |
| Tensile Strength | 11,030 psi |
| Coefficient of Thermal Expansion | 6 x 10^-5 K^-1 |
| Static-Resistant | Not Static-Resistant |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| Water Absorption | 0.4 % |
| Scratch-Resistant | Not Scratch-Resistant |
| Plastic Length | 8 ft |
| Impact Strength | 0.28 ft-lb/in |
| Temperature Range | 32 Degrees F - 170 Degrees F |
| Light Transmission | 31.4 % |
| Rockwell Hardness | 95 HRM |
| Maximum Temperature | 170 Degrees F |
| Shore Hardness | 98 Shore D |
| FDA Compliance | Not FDA Compliant |
| UV-Resistant | UV-Resistant |
| Plastic Thickness | 0.234375 in |
| Water Absorption Rating | Poor (0.26+%) |
| Flexural Modulus | 2,746 MPa |
| Standards | Not Rated |
| Machinability | Not Rated |
| Metal Detectable | Not Metal Detectable |
| Mfr. Model # | PS-CACT-132 |
| Country of Origin | Indonesia (subject to change) |
| UNSPSC | 13102005 |
Description
Acrylic Sheet, Acrylic, Grade Standard, Plastic Length 8 ft, Plastic Width 4 ft, Plastic Thickness 0.234375 in, Gray, Plastic Clarity Opaque, Tensile Strength 11,030 psi, Impact Strength 0.28 ft-lb/in, Friction Coefficient 0.8, Water Absorption 0.4 Percent, Temperature Range 32 Degrees to 170 Degrees F, Plastic Density 0.043 lb/cu in, Plastic Hardness Rockwell M95