Acetal Sheet: 2.25 in Thick, 12 in x 24 in, Black, Opaque, 9, 500 psi Tensile Strength, 1 ft-lb/in
In Stock
$849.50
/each
Earn 849 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Acetal Sheet: 2.25 in Thick, 12 in x 24 in, B...
Item 1NLX3
$849.50
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Metal Detectable | Not Metal Detectable |
| Maximum Adhesive Temperature | 180 Degrees F |
| Elongation | 40 % |
| Minimum Adhesive Temperature | -30 Degrees F |
| Static-Resistant | Not Static-Resistant |
| Maximum Temperature | 180 Degrees F |
| FDA Compliance | 21 CFR 177.2470 |
| Friction Coefficient | 0.25 |
| Plastic Width | 12 in |
| Plastic Thickness | 2.25 in |
| Impact Strength | 1 ft-lb/in |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Light Transmission | 0 % |
| Plastic Clarity | Opaque |
| Minimum Temperature | -40 Degrees F |
| Temperature Range | -40 Degrees F to 180 Degrees F |
| Coefficient of Thermal Expansion | 6.8 x 10^-5 in/in/ Degrees F |
| Flexural Modulus | 400 ksi |
| Rockwell Hardness | 88 HRM |
| UV-Resistant | UV-Resistant |
| Material | Acetal Copolymer |
| Shore Hardness | 85 Shore D |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Standards | ASTM 06778, ASTM 04181 |
| Dielectric Strength | 420 V/mil |
| Machinability | 100 % |
| Scratch-Resistant | Scratch-Resistant |
| Fabrication | Extruded |
| Tensile Strength | 9,500 psi |
| Plastic Length | 24 in |
| Wear Rate | 2.00 x 10^-5 cu mm/N-m |
| Color | Black |
| Water Absorption | 0.2 % |
| Water Absorption Rating | Good (0.051% to 0.25%) |
| Mfr. Model # | 1NLX3 |
| Country of Origin | Germany (subject to change) |
| UNSPSC | 13102003 |
Description
Acetal Copolymer Sheet, Acetal Copolymer, Grade Standard, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 2.25 in, Black, Plastic Clarity Opaque, Tensile Strength 9,500 psi, Impact Strength 1 ft-lb/in, Friction Coefficient 0.25, Water Absorption 0.2 Percent, Temperature Range 32 Degrees to 180 Degrees F, Plastic Density 1.41 g/cc, Plastic Hardness Rockwell M88