Nylon Sheet: 0.875 in Thick, 24 in x 24 in, Opaque, Blue, 11, 000 psi Tensile Strength, 0.4 ft-lb/in
In Stock
$544.00
/each
Earn 544 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Nylon Sheet: 0.875 in Thick, 24 in x 24 in, O...
Item 1ETF4
$544.00
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Friction Coefficient | 0.2 |
| Material | Nylon |
| Water Absorption | 0.72 % |
| Shore Hardness | 85 Shore D |
| Dielectric Strength | 500 V/mil |
| Plastic Width | 24 in |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Wear Rate | 1.08 x 10^-4 cu mm/N-m |
| Flexural Modulus | 500,000 psi |
| Rockwell Hardness | 110 HRM |
| Color | Blue |
| Metal Detectable | Not Metal Detectable |
| Maximum Temperature | 260 Degrees F |
| FDA Compliance | 21 CFR 177.1500/21 CFR 177.2500 |
| Temperature Range | -22 Degrees F to 260 Degrees F |
| Impact Strength | 0.4 ft-lb/in |
| Machinability | 80 % |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| Standards | 3A Dairy/FDA CFR 177.1500 |
| Minimum Temperature | -22 Degrees F |
| Coefficient of Thermal Expansion | 80 x 10^-6 m/[m-K] |
| Fabrication | Cast |
| Plastic Length | 24 in |
| Plastic Clarity | Opaque |
| Plastic Thickness | 0.875 in |
| UV-Resistant | Not UV-Resistant |
| Static-Resistant | Not Static-Resistant |
| Maximum Adhesive Temperature | 260 Degrees F |
| Scratch-Resistant | Scratch-Resistant |
| Tensile Strength | 11,000 psi |
| Light Transmission | 0 % |
| Water Absorption Rating | Poor (0.26+%) |
| Filler Material | MDS |
| Minimum Adhesive Temperature | 140 Degrees F |
| Mfr. Model # | 1ETF4 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 13111208 |
Description
Nylon Sheet, Nylon, Grade Enhanced Temperature, Plastic Length 24 in, Plastic Width 24 in, Plastic Thickness 0.875 in, Blue, Plastic Clarity Opaque, Tensile Strength 11,000 psi, Impact Strength 0.4 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.72 Percent, Temperature Range 32 Degrees to 260 Degrees F, Plastic Density 1.15 g/cc, Plastic Hardness 85D