Nylon Sheet: 0.75 in Thick, 24 in x 24 in, Opaque, Blue, 11, 000 psi Tensile Strength, 0.4 ft-lb/in
In Stock
$1,069.00
/each
Earn 1069 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Nylon Sheet: 0.75 in Thick, 24 in x 24 in, Op...
Item 1ETF3
$1,069.00
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Minimum Temperature | -22 Degrees F |
| Light Transmission | 0 % |
| FDA Compliance | 21 CFR 177.1500/21 CFR 177.2500 |
| UV-Resistant | Not UV-Resistant |
| Filler Material | MDS |
| Flexural Modulus | 500,000 psi |
| Temperature Range | -22 Degrees F to 260 Degrees F |
| Plastic Length | 24 in |
| Rockwell Hardness | 110 HRM |
| Maximum Adhesive Temperature | 260 Degrees F |
| Material | Nylon |
| Maximum Temperature | 260 Degrees F |
| Minimum Adhesive Temperature | 140 Degrees F |
| Shore Hardness | 85 Shore D |
| Standards | 3A Dairy/FDA CFR 177.1500 |
| Dielectric Strength | 500 V/mil |
| Plastic Thickness | 0.75 in |
| Scratch-Resistant | Scratch-Resistant |
| Plastic Clarity | Opaque |
| Water Absorption | 0.72 % |
| Impact Strength | 0.4 ft-lb/in |
| Coefficient of Thermal Expansion | 80 x 10^-6 m/[m-K] |
| Plastic Width | 24 in |
| Static-Resistant | Not Static-Resistant |
| Fabrication | Cast |
| Machinability | 80 % |
| Water Absorption Rating | Poor (0.26+%) |
| Color | Blue |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Metal Detectable | Not Metal Detectable |
| Tensile Strength | 11,000 psi |
| Wear Rate | 1.08 x 10^-4 cu mm/N-m |
| Friction Coefficient | 0.2 |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| Mfr. Model # | 1ETF3 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 13111208 |
Description
Nylon Sheet, Nylon, Grade Enhanced Temperature, Plastic Length 24 in, Plastic Width 24 in, Plastic Thickness 0.75 in, Blue, Plastic Clarity Opaque, Tensile Strength 11,000 psi, Impact Strength 0.4 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.72 Percent, Temperature Range 32 Degrees to 260 Degrees F, Plastic Density 1.15 g/cc, Plastic Hardness 85D