Nylon Sheet: 0.625 in Thick, 24 in x 24 in, Opaque, Blue, 11, 000 psi Tensile Strength, 0.4 ft-lb/in
In Stock
$739.00
/each
Earn 739 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Nylon Sheet: 0.625 in Thick, 24 in x 24 in, O...
Item 1ETF2
$739.00
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| FDA Compliance | 21 CFR 177.1500/21 CFR 177.2500 |
| Shore Hardness | 85 Shore D |
| Fabrication | Cast |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| Impact Strength | 0.4 ft-lb/in |
| Metal Detectable | Not Metal Detectable |
| Color | Blue |
| Light Transmission | 0 % |
| Machinability | 80 % |
| Static-Resistant | Not Static-Resistant |
| Minimum Temperature | -22 Degrees F |
| Water Absorption | 0.72 % |
| Material | Nylon |
| Coefficient of Thermal Expansion | 80 x 10^-6 m/[m-K] |
| Plastic Thickness | 0.625 in |
| UV-Resistant | Not UV-Resistant |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Plastic Clarity | Opaque |
| Flexural Modulus | 500,000 psi |
| Maximum Temperature | 260 Degrees F |
| Standards | 3A Dairy/FDA CFR 177.1500 |
| Plastic Width | 24 in |
| Temperature Range | -22 Degrees F to 260 Degrees F |
| Maximum Adhesive Temperature | 260 Degrees F |
| Minimum Adhesive Temperature | 140 Degrees F |
| Water Absorption Rating | Poor (0.26+%) |
| Dielectric Strength | 500 V/mil |
| Filler Material | MDS |
| Friction Coefficient | 0.2 |
| Wear Rate | 1.08 x 10^-4 cu mm/N-m |
| Scratch-Resistant | Scratch-Resistant |
| Plastic Length | 24 in |
| Tensile Strength | 11,000 psi |
| Rockwell Hardness | 110 HRM |
| Mfr. Model # | 1ETF2 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 13111208 |
Description
Nylon Sheet, Nylon, Grade Enhanced Temperature, Plastic Length 24 in, Plastic Width 24 in, Plastic Thickness 0.625 in, Blue, Plastic Clarity Opaque, Tensile Strength 11,000 psi, Impact Strength 0.4 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.72 Percent, Temperature Range 32 Degrees to 260 Degrees F, Plastic Density 1.15 g/cc, Plastic Hardness 85D