Nylon Sheet: 1.5 in Thick, 12 in x 4 ft, Opaque, Blue, 11, 000 psi Tensile Strength, 0.4 ft-lb/in
In Stock
$1,690.00
/each
Earn 1690 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Nylon Sheet: 1.5 in Thick, 12 in x 4 ft, Opaq...
Item 1ETD5
$1,690.00
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| UV-Resistant | Not UV-Resistant |
| Wear Rate | 1.08 x 10^-4 cu mm/N-m |
| Machinability | 80 % |
| Dielectric Strength | 500 V/mil |
| Plastic Length | 4 ft |
| Coefficient of Thermal Expansion | 80 x 10^-6 m/[m-K] |
| Scratch-Resistant | Scratch-Resistant |
| Impact Strength | 0.4 ft-lb/in |
| Water Absorption | 0.72 % |
| Maximum Adhesive Temperature | 260 Degrees F |
| Plastic Clarity | Opaque |
| FDA Compliance | 21 CFR 177.1500/21 CFR 177.2500 |
| Material | Nylon |
| Shore Hardness | 85 Shore D |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| Plastic Width | 12 in |
| Temperature Range | -22 Degrees F to 260 Degrees F |
| Friction Coefficient | 0.2 |
| Rockwell Hardness | 110 HRM |
| Filler Material | MDS |
| Light Transmission | 0 % |
| Plastic Thickness | 1.5 in |
| Water Absorption Rating | Poor (0.26+%) |
| Fabrication | Cast |
| Minimum Temperature | -22 Degrees F |
| Tensile Strength | 11,000 psi |
| Flexural Modulus | 500,000 psi |
| Minimum Adhesive Temperature | 140 Degrees F |
| Standards | 3A Dairy/FDA CFR 177.1500 |
| Metal Detectable | Not Metal Detectable |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Color | Blue |
| Maximum Temperature | 260 Degrees F |
| Static-Resistant | Not Static-Resistant |
| Mfr. Model # | 1ETD5 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 13111208 |
Description
Nylon Sheet, Nylon, Grade Enhanced Temperature, Plastic Length 4 ft, Plastic Width 12 in, Plastic Thickness 1.5 in, Blue, Plastic Clarity Opaque, Tensile Strength 11,000 psi, Impact Strength 0.4 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.72 Percent, Temperature Range 32 Degrees to 260 Degrees F, Plastic Density 1.15 g/cc, Plastic Hardness 85D