Nylon Sheet: 3.5 in Thick, 12 in x 24 in, Opaque, Blue, 11, 000 psi Tensile Strength, 0.4 ft-lb/in
In Stock
$1,739.00
/each
Earn 1739 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Nylon Sheet: 3.5 in Thick, 12 in x 24 in, Opa...
Item 1ETC2
$1,739.00
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Filler Material | MDS |
| Friction Coefficient | 0.2 |
| Material | Nylon |
| Rockwell Hardness | 110 HRM |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| Light Transmission | 0 % |
| UV-Resistant | Not UV-Resistant |
| Wear Rate | 1.08 x 10^-4 cu mm/N-m |
| Tensile Strength | 11,000 psi |
| Static-Resistant | Not Static-Resistant |
| Plastic Clarity | Opaque |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Metal Detectable | Not Metal Detectable |
| Shore Hardness | 85 Shore D |
| Coefficient of Thermal Expansion | 80 x 10^-6 m/[m-K] |
| Maximum Temperature | 260 Degrees F |
| Machinability | 80 % |
| Minimum Temperature | -22 Degrees F |
| Flexural Modulus | 500,000 psi |
| Temperature Range | -22 Degrees F to 260 Degrees F |
| Water Absorption Rating | Poor (0.26+%) |
| Fabrication | Cast |
| Minimum Adhesive Temperature | 140 Degrees F |
| Standards | 3A Dairy/FDA CFR 177.1500 |
| Plastic Length | 24 in |
| Plastic Thickness | 3.5 in |
| Maximum Adhesive Temperature | 260 Degrees F |
| Plastic Width | 12 in |
| Impact Strength | 0.4 ft-lb/in |
| Color | Blue |
| Dielectric Strength | 500 V/mil |
| Water Absorption | 0.72 % |
| FDA Compliance | 21 CFR 177.1500/21 CFR 177.2500 |
| Scratch-Resistant | Scratch-Resistant |
| Mfr. Model # | 1ETC2 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 13111208 |
Description
Nylon Sheet, Nylon, Grade Enhanced Temperature, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 3.5 in, Blue, Plastic Clarity Opaque, Tensile Strength 11,000 psi, Impact Strength 0.4 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.72 Percent, Temperature Range 32 Degrees to 260 Degrees F, Plastic Density 1.15 g/cc, Plastic Hardness 85D