Nylon Sheet: 2.25 in Thick, 12 in x 24 in, Opaque, Blue, 11, 000 psi Tensile Strength, 0.4 ft-lb/in
In Stock
$1,176.00
/each
Earn 1176 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Nylon Sheet: 2.25 in Thick, 12 in x 24 in, Op...
Item 1ETB6
$1,176.00
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Color | Blue |
| Shore Hardness | 85 Shore D |
| Standards | 3A Dairy/FDA CFR 177.1500 |
| Static-Resistant | Not Static-Resistant |
| Flexural Modulus | 500,000 psi |
| Dielectric Strength | 500 V/mil |
| Material | Nylon |
| Maximum Adhesive Temperature | 260 Degrees F |
| Wear Rate | 1.08 x 10^-4 cu mm/N-m |
| FDA Compliance | 21 CFR 177.1500/21 CFR 177.2500 |
| Metal Detectable | Not Metal Detectable |
| Plastic Clarity | Opaque |
| Light Transmission | 0 % |
| Plastic Length | 24 in |
| Filler Material | MDS |
| Minimum Temperature | -22 Degrees F |
| Friction Coefficient | 0.2 |
| Water Absorption Rating | Poor (0.26+%) |
| Impact Strength | 0.4 ft-lb/in |
| Fabrication | Cast |
| Coefficient of Thermal Expansion | 80 x 10^-6 m/[m-K] |
| Water Absorption | 0.72 % |
| Minimum Adhesive Temperature | 140 Degrees F |
| Maximum Temperature | 260 Degrees F |
| Tensile Strength | 11,000 psi |
| Temperature Range | -22 Degrees F to 260 Degrees F |
| Machinability | 80 % |
| Plastic Width | 12 in |
| Rockwell Hardness | 110 HRM |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| UV-Resistant | Not UV-Resistant |
| Scratch-Resistant | Scratch-Resistant |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Plastic Thickness | 2.25 in |
| Mfr. Model # | 1ETB6 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 13111208 |
Description
Nylon Sheet, Nylon, Grade Enhanced Temperature, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 2.25 in, Blue, Plastic Clarity Opaque, Tensile Strength 11,000 psi, Impact Strength 0.4 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.72 Percent, Temperature Range 32 Degrees to 260 Degrees F, Plastic Density 1.15 g/cc, Plastic Hardness 85D