Nylon Sheet: 0.875 in Thick, 12 in x 24 in, Opaque, Blue, 11, 000 psi Tensile Strength, 0.4 ft-lb/in
In Stock
$487.25
/each
Earn 487 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Nylon Sheet: 0.875 in Thick, 12 in x 24 in, O...
Item 1ETA9
$487.25
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Maximum Temperature | 260 Degrees F |
| Water Absorption | 0.72 % |
| Tensile Strength | 11,000 psi |
| Color | Blue |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Scratch-Resistant | Scratch-Resistant |
| UV-Resistant | Not UV-Resistant |
| Plastic Thickness | 0.875 in |
| Wear Rate | 1.08 x 10^-4 cu mm/N-m |
| Material | Nylon |
| Coefficient of Thermal Expansion | 80 x 10^-6 m/[m-K] |
| Friction Coefficient | 0.2 |
| Water Absorption Rating | Poor (0.26+%) |
| Metal Detectable | Not Metal Detectable |
| Light Transmission | 0 % |
| FDA Compliance | 21 CFR 177.1500/21 CFR 177.2500 |
| Filler Material | MDS |
| Flexural Modulus | 500,000 psi |
| Rockwell Hardness | 110 HRM |
| Fabrication | Cast |
| Maximum Adhesive Temperature | 260 Degrees F |
| Minimum Temperature | -22 Degrees F |
| Plastic Width | 12 in |
| Standards | 3A Dairy/FDA CFR 177.1500 |
| Static-Resistant | Not Static-Resistant |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| Temperature Range | -22 Degrees F to 260 Degrees F |
| Machinability | 80 % |
| Dielectric Strength | 500 V/mil |
| Impact Strength | 0.4 ft-lb/in |
| Plastic Length | 24 in |
| Plastic Clarity | Opaque |
| Shore Hardness | 85 Shore D |
| Minimum Adhesive Temperature | 140 Degrees F |
| Mfr. Model # | 1ETA9 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 13111208 |
Description
Nylon Sheet, Nylon, Grade Enhanced Temperature, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.875 in, Blue, Plastic Clarity Opaque, Tensile Strength 11,000 psi, Impact Strength 0.4 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.72 Percent, Temperature Range 32 Degrees to 260 Degrees F, Plastic Density 1.15 g/cc, Plastic Hardness 85D