Nylon Sheet: 0.625 in Thick, 12 in x 24 in, Opaque, Blue, 11, 000 psi Tensile Strength, 0.4 ft-lb/in
In Stock
$372.50
/each
Earn 372 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Nylon Sheet: 0.625 in Thick, 12 in x 24 in, O...
Item 1ETA7
$372.50
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Fabrication | Cast |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| Metal Detectable | Not Metal Detectable |
| Color | Blue |
| Dielectric Strength | 500 V/mil |
| Friction Coefficient | 0.2 |
| Maximum Temperature | 260 Degrees F |
| Material | Nylon |
| Standards | 3A Dairy/FDA CFR 177.1500 |
| Impact Strength | 0.4 ft-lb/in |
| Machinability | 80 % |
| Plastic Clarity | Opaque |
| Water Absorption Rating | Poor (0.26+%) |
| Plastic Thickness | 0.625 in |
| Temperature Range | -22 Degrees F to 260 Degrees F |
| Tensile Strength | 11,000 psi |
| Wear Rate | 1.08 x 10^-4 cu mm/N-m |
| Maximum Adhesive Temperature | 260 Degrees F |
| Flexural Modulus | 500,000 psi |
| Light Transmission | 0 % |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Shore Hardness | 85 Shore D |
| Scratch-Resistant | Scratch-Resistant |
| Plastic Length | 24 in |
| Rockwell Hardness | 110 HRM |
| Coefficient of Thermal Expansion | 80 x 10^-6 m/[m-K] |
| FDA Compliance | 21 CFR 177.1500/21 CFR 177.2500 |
| UV-Resistant | Not UV-Resistant |
| Minimum Temperature | -22 Degrees F |
| Static-Resistant | Not Static-Resistant |
| Minimum Adhesive Temperature | 140 Degrees F |
| Plastic Width | 12 in |
| Filler Material | MDS |
| Water Absorption | 0.72 % |
| Mfr. Model # | 1ETA7 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 13111208 |
Description
Nylon Sheet, Nylon, Grade Enhanced Temperature, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.625 in, Blue, Plastic Clarity Opaque, Tensile Strength 11,000 psi, Impact Strength 0.4 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.72 Percent, Temperature Range 32 Degrees to 260 Degrees F, Plastic Density 1.15 g/cc, Plastic Hardness 85D