Nylon Sheet: 0.25 in Thick, 12 in x 24 in, Opaque, Blue, 11, 000 psi Tensile Strength, 0.4 ft-lb/in
In Stock
$197.00
/each
Earn 197 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Nylon Sheet: 0.25 in Thick, 12 in x 24 in, Op...
Item 1ETA4
$197.00
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Maximum Adhesive Temperature | 260 Degrees F |
| Static-Resistant | Not Static-Resistant |
| Plastic Width | 12 in |
| Material | Nylon |
| Plastic Length | 24 in |
| Standards | 3A Dairy/FDA CFR 177.1500 |
| Rockwell Hardness | 110 HRM |
| Temperature Range | -22 Degrees F to 260 Degrees F |
| Dielectric Strength | 500 V/mil |
| Maximum Temperature | 260 Degrees F |
| Minimum Adhesive Temperature | 140 Degrees F |
| Plastic Thickness | 0.25 in |
| Tensile Strength | 11,000 psi |
| Machinability | 80 % |
| UV-Resistant | Not UV-Resistant |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Metal Detectable | Not Metal Detectable |
| Flexural Modulus | 500,000 psi |
| Water Absorption | 0.72 % |
| Filler Material | MDS |
| Minimum Temperature | -22 Degrees F |
| Color | Blue |
| Shore Hardness | 85 Shore D |
| Water Absorption Rating | Poor (0.26+%) |
| Wear Rate | 1.08 x 10^-4 cu mm/N-m |
| Plastic Clarity | Opaque |
| Friction Coefficient | 0.2 |
| Impact Strength | 0.4 ft-lb/in |
| Coefficient of Thermal Expansion | 80 x 10^-6 m/[m-K] |
| Light Transmission | 0 % |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| Scratch-Resistant | Scratch-Resistant |
| FDA Compliance | 21 CFR 177.1500/21 CFR 177.2500 |
| Fabrication | Cast |
| Mfr. Model # | 1ETA4 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 13111208 |
Description
Nylon Sheet, Nylon, Grade Enhanced Temperature, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.25 in, Blue, Plastic Clarity Opaque, Tensile Strength 11,000 psi, Impact Strength 0.4 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.72 Percent, Temperature Range 32 Degrees to 260 Degrees F, Plastic Density 1.15 g/cc, Plastic Hardness 85D