Nylon Sheet: 3.75 in Thick, 12 in x 12 in, Opaque, Blue, 11, 000 psi Tensile Strength, 0.4 ft-lb/in
In Stock
$968.00
/each
Earn 968 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Nylon Sheet: 3.75 in Thick, 12 in x 12 in, Op...
Item 1ETA1
$968.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2095 |
| Brand | APPROVED VENDOR |
| Coefficient of Thermal Expansion | 80 x 10^-6 m/[m-K] |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| Machinability | 80 % |
| Filler Material | MDS |
| Material | Nylon |
| Plastic Length | 12 in |
| Shore Hardness | 85 Shore D |
| Water Absorption Rating | Poor (0.26+%) |
| Temperature Range | -22 Degrees F to 260 Degrees F |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Scratch-Resistant | Scratch-Resistant |
| Tensile Strength | 11,000 psi |
| Impact Strength | 0.4 ft-lb/in |
| Plastic Thickness | 3.75 in |
| Wear Rate | 1.08 x 10^-4 cu mm/N-m |
| Standards | 3A Dairy/FDA CFR 177.1500 |
| Light Transmission | 0 % |
| Maximum Temperature | 260 Degrees F |
| Static-Resistant | Not Static-Resistant |
| Maximum Adhesive Temperature | 260 Degrees F |
| Plastic Width | 12 in |
| Minimum Temperature | -22 Degrees F |
| Rockwell Hardness | 110 HRM |
| Dielectric Strength | 500 V/mil |
| Friction Coefficient | 0.2 |
| UV-Resistant | Not UV-Resistant |
| Fabrication | Cast |
| Flexural Modulus | 500,000 psi |
| Plastic Clarity | Opaque |
| Color | Blue |
| Minimum Adhesive Temperature | 140 Degrees F |
| Metal Detectable | Not Metal Detectable |
| FDA Compliance | 21 CFR 177.1500/21 CFR 177.2500 |
| Water Absorption | 0.72 % |
| Mfr. Model # | 1ETA1 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 13111208 |
Description
Nylon Sheet, Nylon, Grade Enhanced Temperature, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 3.75 in, Blue, Plastic Clarity Opaque, Tensile Strength 11,000 psi, Impact Strength 0.4 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.72 Percent, Temperature Range 32 Degrees to 260 Degrees F, Plastic Density 1.15 g/cc, Plastic Hardness 85D