Nylon Sheet: 0.875 in Thick, 12 in x 12 in, Opaque, Blue, 11, 000 psi Tensile Strength, 0.4 ft-lb/in
In Stock
$237.75
/each
Earn 237 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Nylon Sheet: 0.875 in Thick, 12 in x 12 in, O...
Item 1ERY7
$237.75
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2095 |
| Brand | APPROVED VENDOR |
| Flexural Modulus | 500,000 psi |
| Plastic Width | 12 in |
| Friction Coefficient | 0.2 |
| Plastic Length | 12 in |
| Standards | 3A Dairy/FDA CFR 177.1500 |
| Machinability | 80 % |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Material | Nylon |
| Maximum Adhesive Temperature | 260 Degrees F |
| Water Absorption | 0.72 % |
| UV-Resistant | Not UV-Resistant |
| Scratch-Resistant | Scratch-Resistant |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| Fabrication | Cast |
| Plastic Clarity | Opaque |
| Static-Resistant | Not Static-Resistant |
| Dielectric Strength | 500 V/mil |
| Minimum Adhesive Temperature | 140 Degrees F |
| Temperature Range | -22 Degrees F to 260 Degrees F |
| Tensile Strength | 11,000 psi |
| FDA Compliance | 21 CFR 177.1500/21 CFR 177.2500 |
| Wear Rate | 1.08 x 10^-4 cu mm/N-m |
| Impact Strength | 0.4 ft-lb/in |
| Minimum Temperature | -22 Degrees F |
| Rockwell Hardness | 110 HRM |
| Color | Blue |
| Coefficient of Thermal Expansion | 80 x 10^-6 m/[m-K] |
| Plastic Thickness | 0.875 in |
| Maximum Temperature | 260 Degrees F |
| Light Transmission | 0 % |
| Filler Material | MDS |
| Metal Detectable | Not Metal Detectable |
| Shore Hardness | 85 Shore D |
| Water Absorption Rating | Poor (0.26+%) |
| Mfr. Model # | 1ERY7 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 13111208 |
Description
Nylon Sheet, Nylon, Grade Enhanced Temperature, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.875 in, Blue, Plastic Clarity Opaque, Tensile Strength 11,000 psi, Impact Strength 0.4 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.72 Percent, Temperature Range 32 Degrees to 260 Degrees F, Plastic Density 1.15 g/cc, Plastic Hardness 85D