Nylon Sheet: 0.5 in Thick, 12 in x 12 in, Opaque, Blue, 11, 000 psi Tensile Strength, 0.4 ft-lb/in
In Stock
$297.00
/each
Earn 297 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Nylon Sheet: 0.5 in Thick, 12 in x 12 in, Opa...
Item 1ERY4
$297.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2095 |
| Brand | APPROVED VENDOR |
| Material | Nylon |
| Minimum Adhesive Temperature | 140 Degrees F |
| Plastic Width | 12 in |
| Color | Blue |
| Flexural Modulus | 500,000 psi |
| Plastic Thickness | 0.5 in |
| Rockwell Hardness | 110 HRM |
| Coefficient of Thermal Expansion | 80 x 10^-6 m/[m-K] |
| FDA Compliance | 21 CFR 177.1500/21 CFR 177.2500 |
| Temperature Range | -22 Degrees F to 260 Degrees F |
| Impact Strength | 0.4 ft-lb/in |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| Machinability | 80 % |
| Standards | 3A Dairy/FDA CFR 177.1500 |
| Static-Resistant | Not Static-Resistant |
| Minimum Temperature | -22 Degrees F |
| Shore Hardness | 85 Shore D |
| Light Transmission | 0 % |
| Plastic Clarity | Opaque |
| Maximum Adhesive Temperature | 260 Degrees F |
| Maximum Temperature | 260 Degrees F |
| Water Absorption Rating | Poor (0.26+%) |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Metal Detectable | Not Metal Detectable |
| Plastic Length | 12 in |
| Tensile Strength | 11,000 psi |
| UV-Resistant | Not UV-Resistant |
| Dielectric Strength | 500 V/mil |
| Water Absorption | 0.72 % |
| Wear Rate | 1.08 x 10^-4 cu mm/N-m |
| Fabrication | Cast |
| Filler Material | MDS |
| Scratch-Resistant | Scratch-Resistant |
| Friction Coefficient | 0.2 |
| Mfr. Model # | 1ERY4 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 13111208 |
Description
Nylon Sheet, Nylon, Grade Enhanced Temperature, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.5 in, Blue, Plastic Clarity Opaque, Tensile Strength 11,000 psi, Impact Strength 0.4 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.72 Percent, Temperature Range 32 Degrees to 260 Degrees F, Plastic Density 1.15 g/cc, Plastic Hardness 85D