Nylon Sheet: 0.375 in Thick, 12 in x 12 in, Opaque, Blue, 11, 000 psi Tensile Strength, 0.4 ft-lb/in
In Stock
$122.30
/each
Earn 122 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Nylon Sheet: 0.375 in Thick, 12 in x 12 in, O...
Item 1ERY3
$122.30
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2095 |
| Brand | APPROVED VENDOR |
| Friction Coefficient | 0.2 |
| Minimum Adhesive Temperature | 140 Degrees F |
| Temperature Range | -22 Degrees F to 260 Degrees F |
| Plastic Clarity | Opaque |
| Static-Resistant | Not Static-Resistant |
| Minimum Temperature | -22 Degrees F |
| Standards | 3A Dairy/FDA CFR 177.1500 |
| Water Absorption | 0.72 % |
| Color | Blue |
| Plastic Width | 12 in |
| Plastic Length | 12 in |
| Impact Strength | 0.4 ft-lb/in |
| Maximum Temperature | 260 Degrees F |
| Material | Nylon |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Maximum Adhesive Temperature | 260 Degrees F |
| Scratch-Resistant | Scratch-Resistant |
| Coefficient of Thermal Expansion | 80 x 10^-6 m/[m-K] |
| UV-Resistant | Not UV-Resistant |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| Metal Detectable | Not Metal Detectable |
| Machinability | 80 % |
| Flexural Modulus | 500,000 psi |
| FDA Compliance | 21 CFR 177.1500/21 CFR 177.2500 |
| Filler Material | MDS |
| Light Transmission | 0 % |
| Plastic Thickness | 0.375 in |
| Tensile Strength | 11,000 psi |
| Wear Rate | 1.08 x 10^-4 cu mm/N-m |
| Fabrication | Cast |
| Water Absorption Rating | Poor (0.26+%) |
| Shore Hardness | 85 Shore D |
| Dielectric Strength | 500 V/mil |
| Rockwell Hardness | 110 HRM |
| Mfr. Model # | 1ERY3 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 13111208 |
Description
Nylon Sheet, Nylon, Grade Enhanced Temperature, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.375 in, Blue, Plastic Clarity Opaque, Tensile Strength 11,000 psi, Impact Strength 0.4 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.72 Percent, Temperature Range 32 Degrees to 260 Degrees F, Plastic Density 1.15 g/cc, Plastic Hardness 85D