Nylon Sheet: 0.1875 in Thick, 12 in x 12 in, Opaque, Blue, 11, 000 psi Tensile Strength, 0.4 ft-lb/in
In Stock
$73.00
/each
Earn 73 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Nylon Sheet: 0.1875 in Thick, 12 in x 12 in,...
Item 1ERY1
$73.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2095 |
| Brand | APPROVED VENDOR |
| Friction Coefficient | 0.2 |
| Machinability | 80 % |
| UV-Resistant | Not UV-Resistant |
| FDA Compliance | 21 CFR 177.1500/21 CFR 177.2500 |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| Material | Nylon |
| Static-Resistant | Not Static-Resistant |
| Plastic Width | 12 in |
| Rockwell Hardness | 110 HRM |
| Plastic Thickness | 0.1875 in |
| Shore Hardness | 85 Shore D |
| Light Transmission | 0 % |
| Coefficient of Thermal Expansion | 80 x 10^-6 m/[m-K] |
| Metal Detectable | Not Metal Detectable |
| Temperature Range | -22 Degrees F to 260 Degrees F |
| Impact Strength | 0.4 ft-lb/in |
| Filler Material | MDS |
| Maximum Temperature | 260 Degrees F |
| Minimum Temperature | -22 Degrees F |
| Color | Blue |
| Fabrication | Cast |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Tensile Strength | 11,000 psi |
| Plastic Clarity | Opaque |
| Maximum Adhesive Temperature | 260 Degrees F |
| Minimum Adhesive Temperature | 140 Degrees F |
| Wear Rate | 1.08 x 10^-4 cu mm/N-m |
| Flexural Modulus | 500,000 psi |
| Water Absorption Rating | Poor (0.26+%) |
| Plastic Length | 12 in |
| Scratch-Resistant | Scratch-Resistant |
| Water Absorption | 0.72 % |
| Dielectric Strength | 500 V/mil |
| Standards | 3A Dairy/FDA CFR 177.1500 |
| Mfr. Model # | 1ERY1 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 13111208 |
Description
Nylon Sheet, Nylon, Grade Enhanced Temperature, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.1875 in, Blue, Plastic Clarity Opaque, Tensile Strength 11,000 psi, Impact Strength 0.4 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.72 Percent, Temperature Range 32 Degrees to 260 Degrees F, Plastic Density 1.15 g/cc, Plastic Hardness 85D