Nylon Sheet: 0.375 in Thick, 12 in x 24 in, Opaque, Green, 9, 900 psi Tensile Strength, 1 ft-lb/in
In Stock
$164.75
/each
Earn 164 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Nylon Sheet: 0.375 in Thick, 12 in x 24 in, O...
Item 1ERK4
$164.75
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Plastic Clarity | Opaque |
| Plastic Thickness | 0.375 in |
| Temperature Range | -40 Degrees F to 185 Degrees F |
| Flexural Modulus | 350,000 psi |
| Color | Green |
| Coefficient of Thermal Expansion | 5.5 x 10^-5 in/in/ Degrees F |
| Metal Detectable | Not Metal Detectable |
| Minimum Temperature | -40 Degrees F |
| Maximum Adhesive Temperature | 180 Degrees F |
| Rockwell Hardness | 85 HRM |
| Friction Coefficient | 0.14 |
| Water Absorption | 0.3 % |
| FDA Compliance | 21 CFR 177.15 |
| Machinability | 90 % |
| Impact Strength | 1 ft-lb/in |
| Dielectric Strength | 600 V/mil |
| Water Absorption Rating | Poor (0.26+%) |
| Plastic Length | 24 in |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Material | Nylon |
| Static-Resistant | Not Static-Resistant |
| Filler Material | Oil |
| Maximum Temperature | 185 Degrees F |
| Scratch-Resistant | Scratch-Resistant |
| Plastic Width | 12 in |
| Standards | 21 CFR Section 177.15/USDA 3A Sanitary 10-17/ASTM D 4066/ASTMD5989 |
| Minimum Adhesive Temperature | 72 Degrees F |
| Light Transmission | 75 % |
| UV-Resistant | Not UV-Resistant |
| Fabrication | Cast |
| Wear Rate | 1.20 x 10^-6 cu mm/N-m |
| Shore Hardness | 80 Shore D |
| Tensile Strength | 9,900 psi |
| Mfr. Model # | 1ERK4 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 13111208 |
Description
Nylon Sheet, Nylon, Grade Oil-Filled, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.375 in, Green, Plastic Clarity Opaque, Tensile Strength 9,900 psi, Impact Strength 1 ft-lb/in, Friction Coefficient 0.14, Water Absorption 0.3 Percent, Temperature Range 32 Degrees to 220 Degrees F, Plastic Density 1.13 g/cc, Plastic Hardness Rockwell M85