Nylon Sheet: 3.25 in Thick, 24 in x 24 in, Opaque, Off-White, 12, 000 psi Tensile Strength
In Stock
$2,229.00
/each
Earn 2229 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Nylon Sheet: 3.25 in Thick, 24 in x 24 in, Op...
Item 1EPT2
$2,229.00
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Plastic Length | 24 in |
| Rockwell Hardness | 85 HRM |
| Shore Hardness | 85 Shore D |
| Fabrication | Cast |
| Static-Resistant | Not Static-Resistant |
| Wear Rate | 5.00 x 10^-7 cu mm/N-m |
| Minimum Adhesive Temperature | 50 Degrees F |
| Water Absorption Rating | Poor (0.26+%) |
| Water Absorption | 0.6 % |
| Dielectric Strength | 600 V/mil |
| Material | Nylon |
| Maximum Adhesive Temperature | 248 Degrees F |
| Color | Off-White |
| Scratch-Resistant | Scratch-Resistant |
| Friction Coefficient | 0.2 |
| FDA Compliance | 21 CFR 177.1500 |
| Metal Detectable | Not Metal Detectable |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Tensile Strength | 12,000 psi |
| Flexural Modulus | 330,000 psi |
| Coefficient of Thermal Expansion | 5.5 x 10^-5 in/ Degrees F |
| Plastic Clarity | Opaque |
| Machinability | 20 % |
| Plastic Thickness | 3.25 in |
| Standards | 3A-Dairy:FDA, USDA |
| Minimum Temperature | -40 Degrees F |
| Maximum Temperature | 356 Degrees F |
| UV-Resistant | Not UV-Resistant |
| Impact Strength | 0.4 ft-lb/in |
| Temperature Range | -40 Degrees F to 356 Degrees F |
| Plastic Width | 24 in |
| Light Transmission | 75 % |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| Mfr. Model # | 1EPT2 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 13111208 |
Description
Nylon Sheet, Nylon, Grade Standard, Plastic Length 24 in, Plastic Width 24 in, Plastic Thickness 3.25 in, Off-White, Plastic Clarity Opaque, Tensile Strength 12,000 psi, Impact Strength 0.4 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.6 Percent, Temperature Range 32 Degrees to 200 Degrees F, Plastic Density 1.14 g/cc, Plastic Hardness Rockwell M85