Submersible Sump Pump: 1/2 hp, 120V AC, 65 gpm Flow Rate @ 10' of Head, 2 in FNPT, Dewatering
In Stock
$506.50
/each
Earn 506 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
DAYTON Submersible Sump Pump: 1/2 hp, 120V AC, 65 gp...
Item 1APP2
$506.50
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2505 |
| Brand | DAYTON |
| Sump Pit Diameter - Minimum | 18 in |
| Flow Rate @ 10 ft of Head | 65 gpm |
| Feet of Head - Maximum | 33 ft |
| Thermal Protection | Auto |
| Connectivity | Auxiliary Contacts |
| Shaft Seal Material | Carbon/Ceramic/Nitrile Rubber |
| Operation | Automatic |
| Control Panel Functions | Adjustable Run Time, Scheduled Pump Cycling |
| Impeller Material | Polycarbonate |
| Duty Cycle | Continuous |
| Switch Actuation | Dual Micro-Reed Float |
| Frequency | 60 Hz |
| For Industry | Residential, Commercial |
| Manufacturers Warranty Length | 1 yr |
| Gauge/Conductor | 16/3 |
| Impeller Design | Open |
| Switch Electrical Connection | Piggyback |
| Volute Material | Cast Iron |
| Rated Voltage | 120V AC |
| Discharge | 2 in FNPT |
| Motor Housing Material | Stainless Steel |
| Power Source | Corded Electric |
| Solids Diameter - Maximum | 1/4 in |
| Standards | UL/CSA |
| Series | Pro Series |
| For Media Type | Clear Water |
| Liquid Temperature - Maximum | 104 Degrees F |
| NEC Cord Designation | SJTW |
| Cord Length | 20 ft |
| Phase | Single |
| Hazardous Location Class | Not Rated |
| Current | 4.3 A |
| Shaft Seal Type | Double Mechanical |
| Horsepower | 1/2 hp |
| Controls Included | Controller |
| Mfr. Model # | 1APP2 |
| Country of Origin | Unknown (subject to change) |
| UNSPSC | 40151512 |
Description
Submersible Sump Pump, HP 1/2, Rated Voltage 120V AC, Hz 60 Hz, Amps 4.3 A, Switch Actuation Dual Micro-Reed Float, Switch Electrical Connection Piggyback, Off Point Not Applicable, On Point Not Applicable, Body Material Stainless Steel, Impeller Material Polycarbonate, Shaft Seal Material - Pumps Buna-N, Carbon, Ceramic, Flow Rate @ 5 Ft. of Head 70 gpm, Flow Rate @ 10 Ft. of Head 65 gpm, Flow Rate @ 15 Ft. of Head 57 gpm, Flow Rate @ 20 Ft. of Head 45 gpm, Max. Head 33 ft