Mill Drill: JMD-18, Belt Drive, 2 hp, 115/230V
In Stock
$4,975.37
/each
Earn 4975 points for this item
($49.75 for your next purchase!)
REGISTER NOW TO EARN!
1 day
Request quantity discount pricing
You're Viewing
JET Mill Drill: JMD-18, Belt Drive, 2 hp, 115/230...
Mfr # 350018
$4,975.37
Customers Also Viewed
No related products found.
Product Details
| Brand | JET |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Drilling Capacity - Steel | 1-1/4 in |
| Includes Digital Readout + Includes Power Downfeed | Light not Included - No Powerfeed |
| Frequency | 60 Hz |
| Table Width x Depth | 32-1/4 in W x 9-1/2 in D |
| Column Shape | Round |
| Spindle Speed - Minimum | 150 RPM |
| Column Diameter | 4-1/2 in |
| Quill Diameter | 3 in |
| Storage Protection Code | A |
| Swing Measurement | 15-7/8 in |
| Included Powerfeeds | No Powerfeed |
| Should Sales be Restricted by Region? | N |
| Spindle Speed Range | 150 RPM to 3,000 RPM |
| Overall Depth | 47 in |
| Ozone Depleting Substance | N |
| Contains California Prop 65 Reproductive Toxicant | N |
| Number of Spindle Speeds | 12 |
| End Milling Capacity | 3/4 in |
| Voltage | 115/230V |
| Product Powered by Fossil Fuel | N |
| Table Work Surface - Depth | 9-1/2 in |
| Overall Width | 40 in |
| Table Work Surface - Width | 32-1/4 in |
| Display Qty | 1 |
| Safety Data Sheet (SDS) Applicable? | N |
| Series | JMD-18 |
| Contains California Prop 65 Carcinogen | N |
| Spindle Taper | R8 |
| Overall Height | 51 in |
| T-Slot Width | 5/8 in |
| Head Material | Belt Drive |
| Display Sell UOM | EA |
| Head Swivel - Right | 360 Degrees |
| Milling Head Drive | Belt Drive |
| Phase | Single |
| Freight Class Code | 18 |
| Maximum Longitudinal Travel | 20-1/2 in |
| Maximum Cross Travel | 7 in |
| Includes | (3) Rubber Knobs, 2-1/2 in Angle Vise (JMD-15), 3/8 in x 1 in Hex Socket Cap Screw, Can Touch-Up Paint, 3/8 in Washer, Crank Body, 23 mm Wrench, 4 mm Hex Wrench, Washers, (3) Handwheels with Handles, 3 mm Hex Wrench, Bolts, Crank Handle, Spindle Guard Assembly, Lifting Hook, 1/2 in Drill Chuck with Chuck Key, 5 mm Hex Wrench, (3) Handle Rods, 2) Rubber Knobs, 3 in Angle Vise, Nuts, Adjustable Carbide Facemill, Facemill Arbor |
| Spindle to Table Distance | 17-1/2 in |
| Standards | UL |
| Is this a Hazardous Material Product? | N |
| Column Material | Cast Iron |
| Motor Speed - Maximum | 3,000 RPM |
| Maximum Spindle Travel | 5 in |
| Horsepower | 2 hp |
| Includes Chuck | Chuck Included |
| Includes Lights | Light not Included |
| Manufacturer Part Number | 350018 |
| Chuck Size | 1/2 in |
| Face Milling Capacity | 3 in |
| Head Swivel - Left | 360 Degrees |
| Number of T-Slots | 4 |
| Includes Stand | Stand Sold Separately |
| Operation | Manual |
| Speed Control | Fixed |
| Spindle Speed - Maximum | 3,000 RPM |
| Mfr. Model # | 350018 |
Description
Mill Drill Machine, Manual, 1ph, 120/240V