Magnetic Drive Pump: 1/2 hp HP, Single Phase, 115V AC, PVDF, 1 in FNPT, 3/4 in NPT
In Stock
$1,232.00
Save 20%
$979.92
/each
Earn 979 points for this item
($9.79 for your next purchase!)
REGISTER NOW TO EARN!
ETA 5-7 BUSINESS DAYS
Request quantity discount pricing
You're Viewing
FINISH THOMPSON Magnetic Drive Pump: 1/2 hp HP, Single Phase,...
Mfr # DB5.5V-T-M622
$979.92
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2530 |
| Brand | FINISH THOMPSON |
| Fluid Temperature Range | 35 Degrees F to 220 Degrees F |
| Priming | Manual |
| Max Fluid Temperature | 220 Degrees F |
| Flow @ 24' Head | 17 gpm |
| Impeller Diameter | 3 in |
| Pumping Application | Chemical Transfer, Liquid Transfer |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Motor Frame Size | 71 |
| Pump Drive Configuration | Close-Coupled |
| Should Sales be Restricted by Region? | N |
| Housing Material | PVDF |
| Impeller Material | PVDF |
| Discharge Standard | NPT |
| Display Qty | 1 |
| Min Ambient Temperature | -20 Degrees F |
| Flow @ 9' Head | 28 gpm |
| Flow Rate (Maximum) | 30 gpm |
| Best Efficiency Flow | 15 gpm |
| Chemical Compatibility | Acetic Acid 80%, Nitric Acid, Fertilizer, Sodium Bisulfate, Ethylene Glycol, Sodium Bisulfite, Sodium Hypochlorite 12.5%, Deionized Water, Sodium Bicarbonate 10%, Herbicide, Acetic Acid 20%, Hydrogen Peroxide up to 50%, Water, Citric Acid 50%, Calcium Chloride, Sulfuric Acid 1% to 98%, Chromic Acid 10%, Antifreeze, Ammonium Hydroxide, Fungicide, Saltwater, Phosphoric Acid 50%, Transmission Fluid |
| Contains California Prop 65 Reproductive Toxicant | N |
| Max Motor Speed | 3,450 RPM |
| Horsepower (Maximum) | 1/2 hp |
| Viscosity (Maximum) | 50 cps |
| Flow @ 6' Head | 30 gpm |
| Hazmat_Message | Compliance_Hazmat_ExcGeneral |
| Number of Stages | 1 |
| Is this a Hazardous Material Product? | N |
| Pump Design | End Suction |
| Inlet Standard | NPT |
| Manufacturers Warranty Length | 5 yr |
| Discharge Diameter | 3/4 in |
| Motor Enclosure Type | TEFC |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Inlet Diameter | 1 in |
| Freight Class Code | 260 |
| Drive Coupling Type | Magnetic Coupling |
| Full Load Current | 4.9 A |
| Overall Length | 14.1 in |
| Mounting Orientation | Horizontal |
| Ozone Depleting Substance | N |
| Display Sell UOM | EA |
| Pump Mounting Style | Base-Mounted, Foot-Mounted |
| Storage Protection Code | A |
| Bearing Type | Radial, Thrust |
| Shaft Seal Type | Sealless |
| Cord Type | 18-3 STW with NEMA 5-15P Plug |
| Max Ambient Temperature | 220 Degrees F |
| Max Specific Gravity | 1.8 |
| Feet of Head (Maximum) | 31 ft |
| Inlet Type | FNPT |
| Port Connections | NPT |
| Flow @ 15' Head | 25 gpm |
| Inlet | 1 in FNPT |
| Shut Off Pressure - Maximum | 13.4 psi |
| Cord Length | 12 ft |
| Contains California Prop 65 Carcinogen | N |
| Suction Port | 1 in NPT |
| Inlet Gender | Female |
| Safety Data Sheet (SDS) Applicable? | N |
| Hazardous Location Class | Not Rated |
| Motor Design | Permanent Split Capacitor |
| Nameplate Voltage | 115V AC |
| Overall Width | 7.6 in |
| Best Efficiency Head | 25 ft |
| Mounting Location | Open Air |
| Overall Height | 7.4 in |
| Discharge Rotation Increments | 0 Degrees |
| Product Powered by Fossil Fuel | N |
| Manufacturer Part Number | DB5.5V-T-M622 |
| Flow @ 3' Head | 30 gpm |
| Flow @ 18' Head | 22 gpm |
| Phase | Single |
| Case Pressure - Maximum | 60 psi |
| Discharge | 3/4 in NPT |
| Gasket Material | FKM |
| Min Fluid Temperature | 35 Degrees F |
| Discharge Gender | Male |
| Mfr. Model # | DB5.5V-T-M622 |
Description
Magnt Drv Pmp, 3/4in, MNPT, 1/2hp, PVDF