Previously Purchased
Filters
Brand
Price
Custom Range
to
Special Attributes
Chamfer Width
Corner Radius
End Mill Cutting Type
End Mill Style
Finish - Machining
Helix Angle
Length of Cut
List Number
Material Application
Milling Diameter
Overall Length
Shank Dia.
Shank Type - Machining
Carbide Roughing End Mills for Nonferrous Materials
260 products
Deep category from CSV: Carbide Roughing End Mills for Nonferrous Materials
Products by Family
Mill, 10.00mm, Carb,
4 products available
| Image | Product Name | Mfr # | Brand | Price | Availability |
|---|---|---|---|---|---|
|
|
Cor Rad End Mill, 10.00mm, Carb, 0.50mm rad
Roughing End Mill, 10 mm Milling Dia., Carbide, Non-Coolant Through, Straight, M...
|
Mfr. #: 49N910004..
|
WIDIA HANITA | $137.91 | In Stock |
|
Cor Rad End Mill, 10.00mm, Carb, 0.50mm rad
Roughing End Mill, 10 mm Milling Dia., Carbide, Non-Coolant Through, Weldon Flat...
|
Mfr. #: 49G910004CW
|
WIDIA HANITA | $17.60 | In Stock |
|
|
Cor Rad End Mill, 10.00mm, Carb, 0.50mm rad
Roughing End Mill, 10 mm Milling Dia., Carbide, Non-Coolant Through, Straight, M...
|
Mfr. #: 49G910004CT
|
WIDIA HANITA | $166.90 | In Stock |
|
Cor Rad End Mill, 10.00mm, Carb, 0.50mm rad
Roughing End Mill, 10 mm Milling Dia., Carbide, Non-Coolant Through, Straight, M...
|
Mfr. #: 49N91001R4ET
|
WIDIA HANITA | $117.80 | In Stock |
Mill, 12.00mm, Carb,
3 products available
| Image | Product Name | Mfr # | Brand | Price | Availability |
|---|---|---|---|---|---|
|
|
Cor Rad End Mill, 12.00mm, Carb, 0.50mm rad
Roughing End Mill, 12 mm Milling Dia., Carbide, Non-Coolant Through, Straight, M...
|
Mfr. #: 49N912005..
|
WIDIA HANITA | $181.52 | In Stock |
|
|
Cor Rad End Mill, 12.00mm, Carb, 0.50mm rad
Roughing End Mill, 12 mm Milling Dia., Carbide, Non-Coolant Through, Straight, M...
|
Mfr. #: 49G912005CT
|
WIDIA HANITA | $222.19 | In Stock |
|
|
Cor Rad End Mill, 12.00mm, Carb, 0.50mm rad
Roughing End Mill, 12 mm Milling Dia., Carbide, Non-Coolant Through, Straight, M...
|
Mfr. #: 49N91201R5ET
|
WIDIA HANITA | $156.41 | In Stock |
Mill, 16.00mm, Carb,
4 products available
| Image | Product Name | Mfr # | Brand | Price | Availability |
|---|---|---|---|---|---|
|
|
Cor Rad End Mill, 16.00mm, Carb, 1.00mm rad
Roughing End Mill, 16 mm Milling Dia., Carbide, Non-Coolant Through, Straight, M...
|
Mfr. #: 49N916006..
|
WIDIA HANITA | $282.43 | In Stock |
|
|
Cor Rad End Mill, 16.00mm, Carb, 1.00mm rad
Roughing End Mill, 16 mm Milling Dia., Carbide, Non-Coolant Through, Straight, M...
|
Mfr. #: 49G916006CT
|
WIDIA HANITA | $323.49 | In Stock |
|
|
Cor Rad End Mill, 16.00mm, Carb, 1.00mm rad
Roughing End Mill, 16 mm Milling Dia., Carbide, Non-Coolant Through, Weldon Flat...
|
Mfr. #: 49G916006CW
|
WIDIA HANITA | $352.43 | In Stock |
|
|
Cor Rad End Mill, 16.00mm, Carb, 1.00mm rad
Roughing End Mill, 16 mm Milling Dia., Carbide, Non-Coolant Through, Straight, M...
|
Mfr. #: 49N91601R6JT
|
WIDIA HANITA | $232.08 | In Stock |
Mill, 20.00mm, Carb,
3 products available
| Image | Product Name | Mfr # | Brand | Price | Availability |
|---|---|---|---|---|---|
|
|
Cor Rad End Mill, 20.00mm, Carb, 1.00mm rad
Roughing End Mill, 20 mm Milling Dia., Carbide, Non-Coolant Through, Straight, M...
|
Mfr. #: 49N920007..
|
WIDIA HANITA | $403.58 | In Stock |
|
|
Cor Rad End Mill, 20.00mm, Carb, 1.00mm rad
Roughing End Mill, 20 mm Milling Dia., Carbide, Non-Coolant Through, Straight, M...
|
Mfr. #: 49G920007CT
|
WIDIA HANITA | $506.48 | In Stock |
|
|
Cor Rad End Mill, 20.00mm, Carb, 1.00mm rad
Roughing End Mill, 20 mm Milling Dia., Carbide, Non-Coolant Through, Straight, M...
|
Mfr. #: 49N92001R7JT
|
WIDIA HANITA | $58.75 | In Stock |
Mill, 6.00mm, Carb,
2 products available
| Image | Product Name | Mfr # | Brand | Price | Availability |
|---|---|---|---|---|---|
|
|
Cor Rad End Mill, 6.00mm, Carb, 0.25mm rad
Roughing End Mill, 6 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Me...
|
Mfr. #: 49N906002..
|
WIDIA HANITA | $77.06 | In Stock |
|
|
Cor Rad End Mill, 6.00mm, Carb, 0.25mm rad
Roughing End Mill, 6 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Me...
|
Mfr. #: 49N90601R2BT
|
WIDIA HANITA | $15.49 | In Stock |
Mill, 8.00mm, Carb,
4 products available
| Image | Product Name | Mfr # | Brand | Price | Availability |
|---|---|---|---|---|---|
|
|
Cor Rad End Mill, 8.00mm, Carb, 0.25mm rad
Roughing End Mill, 8 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Me...
|
Mfr. #: 49N908003..
|
WIDIA HANITA | $106.23 | In Stock |
|
|
Cor Rad End Mill, 8.00mm, Carb, 0.25mm rad
Roughing End Mill, 8 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Me...
|
Mfr. #: 49G908003CT
|
WIDIA HANITA | $121.20 | In Stock |
|
|
Cor Rad End Mill, 8.00mm, Carb, 0.25mm rad
Roughing End Mill, 8 mm Milling Dia., Carbide, Non-Coolant Through, Weldon Flat,...
|
Mfr. #: 49G908003CW
|
WIDIA HANITA | $12.79 | In Stock |
|
|
Cor Rad End Mill, 8.00mm, Carb, 0.25mm rad
Roughing End Mill, 8 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Me...
|
Mfr. #: 49N90801R3BT
|
WIDIA HANITA | $90.93 | In Stock |
Corner Chamfer Mill,
21 products available
| Image | Product Name | Mfr # | Brand | Price | Availability |
|---|---|---|---|---|---|
|
|
Corner Chamfer End Mill, 3/8" Dia, Carb.
Roughing End Mill, Uncoated, 7/8 in
|
Mfr. #: GMAKD38C3
|
APPROVED VENDOR | $176.01 | In Stock |
|
Corner Chamfer End Mill, 1", Carbide
Roughing End Mill, 1 in Milling Dia., Carbide, Uncoated, Non-Coolant Through, St...
|
Mfr. #: 255-051000
|
APPROVED VENDOR | $369.35 | In Stock |
|
Corner Chamfer End Mill, 1", Carbide
Roughing End Mill, 1 in Milling Dia., Carbide, ZrN, Non-Coolant Through, Straigh...
|
Mfr. #: 255-051000D
|
APPROVED VENDOR | $423.73 | In Stock |
|
Corner Chamfer End Mill, 1/2", Carbide
Roughing End Mill, 0.5 in Milling Dia., Carbide, ZrN, Non-Coolant Through, Strai...
|
Mfr. #: 255-050500D
|
APPROVED VENDOR | $113.51 | In Stock |
|
|
Corner Chamfer End Mill, 1/2", Carbide
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Non-Coolant Through,...
|
Mfr. #: 255-050500
|
APPROVED VENDOR | $102.53 | In Stock |
|
|
Corner Chamfer End Mill, 1/4", Carbide
Roughing End Mill, 0.25 in Milling Dia., Carbide, ZrN, Non-Coolant Through, Stra...
|
Mfr. #: 255-050250D
|
APPROVED VENDOR | $54.29 | In Stock |
|
|
Corner Chamfer End Mill, 1/4", Carbide
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Non-Coolant Through,...
|
Mfr. #: 255-050250
|
APPROVED VENDOR | $47.43 | In Stock |
|
Corner Chamfer End Mill, 12.00mm, Carbide
Roughing End Mill, 12 mm Milling Dia., Carbide, Weldon Flat, Metric, 0.0394 in,...
|
Mfr. #: 490912005WW
|
WIDIA HANITA | $87.08 | In Stock |
|
|
Corner Chamfer End Mill, 16.00mm, Carbide
Roughing End Mill, 16 mm Milling Dia., Carbide, Weldon Flat, Metric, 0.0394 in,...
|
Mfr. #: 490916006WW
|
WIDIA HANITA | $229.60 | In Stock |
|
|
Corner Chamfer End Mill, 3/16", Carbide
Roughing End Mill, 0.1875 in Milling Dia., Carbide, Uncoated, Non-Coolant Throug...
|
Mfr. #: 255-050187
|
APPROVED VENDOR | $42.74 | In Stock |
|
|
Corner Chamfer End Mill, 3/16", Carbide
Roughing End Mill, 0.1875 in Milling Dia., Carbide, ZrN, Non-Coolant Through, St...
|
Mfr. #: 255-050187D
|
APPROVED VENDOR | $44.87 | In Stock |
|
Corner Chamfer End Mill, 3/4", Carbide
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Straight, Inch, 45 D...
|
Mfr. #: GMAKD34C3
|
APPROVED VENDOR | $492.90 | In Stock |
|
|
Corner Chamfer End Mill, 3/4", Carbide
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Non-Coolant Through,...
|
Mfr. #: 255-050750
|
APPROVED VENDOR | $281.27 | In Stock |
|
|
Corner Chamfer End Mill, 3/4", Carbide
Roughing End Mill, 0.75 in Milling Dia., Carbide, ZrN, Non-Coolant Through, Stra...
|
Mfr. #: 255-050750D
|
APPROVED VENDOR | $275.89 | In Stock |
|
|
Corner Chamfer End Mill, 3/8", Carbide
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Non-Coolant Through...
|
Mfr. #: 255-050375
|
APPROVED VENDOR | $63.68 | In Stock |
|
|
Corner Chamfer End Mill, 3/8", Carbide
Roughing End Mill, 0.375 in Milling Dia., Carbide, ZrN, Non-Coolant Through, Str...
|
Mfr. #: 255-050375D
|
APPROVED VENDOR | $77.32 | In Stock |
|
|
Corner Chamfer End Mill, 5/16", Carbide
Roughing End Mill, 0.3125 in Milling Dia., Carbide, Uncoated, Non-Coolant Throug...
|
Mfr. #: 255-050312
|
APPROVED VENDOR | $56.08 | In Stock |
|
|
Corner Chamfer End Mill, 5/16", Carbide
Roughing End Mill, 0.3125 in Milling Dia., Carbide, ZrN, Non-Coolant Through, St...
|
Mfr. #: 255-050312D
|
APPROVED VENDOR | $70.53 | In Stock |
|
|
Corner Chamfer End Mill, 5/8", Carbide
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Non-Coolant Through...
|
Mfr. #: 255-050625
|
APPROVED VENDOR | $175.40 | In Stock |
|
|
Corner Chamfer End Mill, 5/8", Carbide
Roughing End Mill, 0.625 in Milling Dia., Carbide, ZrN, Non-Coolant Through, Str...
|
Mfr. #: 255-050625D
|
APPROVED VENDOR | $208.09 | In Stock |
|
|
Corner Chamfer End Mill, 6.00mm, Carbide
Roughing End Mill, 6 mm Milling Dia., Carbide, Weldon Flat, Metric, 0.0024 in, 1...
|
Mfr. #: 490906002WW
|
WIDIA HANITA | $84.26 | In Stock |
Corner Radius Mill
11 products available
| Image | Product Name | Mfr # | Brand | Price | Availability |
|---|---|---|---|---|---|
|
|
Corner Radius End Mill
Roughing End Mill, 1.5 mm Milling Dia., Carbide, DLC, Non-Coolant Through, Strai...
|
Mfr. #: SGED290150110
|
YG-1 TOOL COMPANY | $99.24 | In Stock |
|
|
Corner Radius End Mill
Roughing End Mill, 1 mm Milling Dia., Carbide, DLC, Non-Coolant Through, Straigh...
|
Mfr. #: SGED290100108
|
YG-1 TOOL COMPANY | $104.42 | In Stock |
|
|
Corner Radius End Mill
Roughing End Mill, 1 mm Milling Dia., Carbide, DLC, Non-Coolant Through, Straigh...
|
Mfr. #: SGED290100208
|
YG-1 TOOL COMPANY | $104.42 | In Stock |
|
|
Corner Radius End Mill
Roughing End Mill, 2 mm Milling Dia., Carbide, DLC, Non-Coolant Through, Straigh...
|
Mfr. #: SGED290200510
|
YG-1 TOOL COMPANY | $86.95 | In Stock |
|
|
Corner Radius End Mill
Roughing End Mill, 10 mm Milling Dia., Carbide, DLC, Non-Coolant Through, Straig...
|
Mfr. #: SGED291000530
|
YG-1 TOOL COMPANY | $207.32 | In Stock |
|
|
Corner Radius End Mill
Roughing End Mill, 6 mm Milling Dia., Carbide, DLC, Non-Coolant Through, Straigh...
|
Mfr. #: SGED290600320
|
YG-1 TOOL COMPANY | $151.15 | In Stock |
|
|
Corner Radius End Mill
Roughing End Mill, 3 mm Milling Dia., Carbide, DLC, Non-Coolant Through, Straigh...
|
Mfr. #: SGED290300216
|
YG-1 TOOL COMPANY | $138.31 | In Stock |
|
|
Corner Radius End Mill
Roughing End Mill, 2 mm Milling Dia., Carbide, DLC, Non-Coolant Through, Straigh...
|
Mfr. #: SGED290200212
|
YG-1 TOOL COMPANY | $86.95 | In Stock |
|
|
Corner Radius End Mill
Roughing End Mill, 2 mm Milling Dia., Carbide, DLC, Non-Coolant Through, Straigh...
|
Mfr. #: SGED290200210
|
YG-1 TOOL COMPANY | $86.95 | In Stock |
|
|
Corner Radius End Mill
Roughing End Mill, 3 mm Milling Dia., Carbide, DLC, Non-Coolant Through, Straigh...
|
Mfr. #: SGED290600212
|
YG-1 TOOL COMPANY | $137.57 | In Stock |
|
Corner Radius End Mill, 0.750" Shank dia.
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.03...
|
Mfr. #: ART30750-03
|
APPROVED VENDOR | $236.15 | In Stock |
Corner Radius, Dia,
1 product available
| Image | Product Name | Mfr # | Brand | Price | Availability |
|---|---|---|---|---|---|
|
|
Corner Radius, 5/8 Dia, 3FLT, .015
Roughing End Mill
|
Mfr. #: 125996
|
GWS TOOL GROUP | $192.65 | In Stock |
Mill, Uncoated, 0.312"
1 product available
| Image | Product Name | Mfr # | Brand | Price | Availability |
|---|---|---|---|---|---|
|
|
End Mill, Uncoated, 0.312" Shank dia.
Roughing End Mill, 0.3125 in Milling Dia., Uncoated, Straight, Inch, 0.01 in, 0....
|
Mfr. #: ART30312-01
|
APPROVED VENDOR | $54.30 | In Stock |
Long Neck Ball
7 products available
| Image | Product Name | Mfr # | Brand | Price | Availability |
|---|---|---|---|---|---|
|
|
Long Neck Ball Nose End Mill
Roughing End Mill, 0.5 mm Milling Dia., Carbide, DLC, Non-Coolant Through
|
Mfr. #: SGED2700508
|
YG-1 TOOL COMPANY | $177.91 | In Stock |
|
|
Long Neck Ball Nose End Mill
Roughing End Mill, 0.5 mm Milling Dia., Carbide, DLC, Non-Coolant Through
|
Mfr. #: SGED2700506
|
YG-1 TOOL COMPANY | $177.91 | In Stock |
|
|
Long Neck Ball Nose End Mill
Roughing End Mill, 10 mm Milling Dia., Carbide, DLC, Non-Coolant Through
|
Mfr. #: SGED2710025
|
YG-1 TOOL COMPANY | $273.58 | In Stock |
|
|
Long Neck Ball Nose End Mill
Roughing End Mill, 2 mm Milling Dia., Carbide, DLC, Non-Coolant Through
|
Mfr. #: SGED2702012
|
YG-1 TOOL COMPANY | $120.67 | In Stock |
|
|
Long Neck Ball Nose End Mill
Roughing End Mill, 1 mm Milling Dia., Carbide, DLC, Non-Coolant Through
|
Mfr. #: SGED2701012
|
YG-1 TOOL COMPANY | $127.28 | In Stock |
|
|
Long Neck Ball Nose End Mill
Roughing End Mill, 1 mm Milling Dia., Carbide, DLC, Non-Coolant Through
|
Mfr. #: SGED2701008
|
YG-1 TOOL COMPANY | $127.28 | In Stock |
|
|
Long Neck Ball Nose End Mill
Roughing End Mill, 1 mm Milling Dia., Carbide, DLC, Non-Coolant Through
|
Mfr. #: SGED2701006
|
YG-1 TOOL COMPANY | $127.28 | In Stock |
Long Neck Mill
6 products available
| Image | Product Name | Mfr # | Brand | Price | Availability |
|---|---|---|---|---|---|
|
|
Long Neck End Mill
Roughing End Mill, 1 mm Milling Dia., Carbide, DLC, Non-Coolant Through, Straigh...
|
Mfr. #: SGED3001012
|
YG-1 TOOL COMPANY | $103.46 | In Stock |
|
|
Long Neck End Mill
Roughing End Mill, 0.5 mm Milling Dia., Carbide, DLC, Non-Coolant Through, Strai...
|
Mfr. #: SGED3000506
|
YG-1 TOOL COMPANY | $113.40 | In Stock |
|
|
Long Neck End Mill
Roughing End Mill, 3 mm Milling Dia., Carbide, DLC, Non-Coolant Through, Straigh...
|
Mfr. #: SGED3003016
|
YG-1 TOOL COMPANY | $142.46 | In Stock |
|
|
Long Neck End Mill
Roughing End Mill, 0.5 mm Milling Dia., Carbide, DLC, Non-Coolant Through, Strai...
|
Mfr. #: SGED3000508
|
YG-1 TOOL COMPANY | $115.54 | In Stock |
|
|
Long Neck End Mill
Roughing End Mill, 0.5 mm Milling Dia., Carbide, DLC, Non-Coolant Through, Strai...
|
Mfr. #: SGED3000504
|
YG-1 TOOL COMPANY | $115.54 | In Stock |
|
|
Long Neck End Mill
Roughing End Mill, 6 mm Milling Dia., Carbide, DLC, Non-Coolant Through, Straigh...
|
Mfr. #: SGED3006020
|
YG-1 TOOL COMPANY | $152.29 | In Stock |
Roughing Mill, Carbide
4 products available
| Image | Product Name | Mfr # | Brand | Price | Availability |
|---|---|---|---|---|---|
|
|
Roughing End Mill, 12 mm, Carbide
Roughing End Mill, 12 mm Milling Dia., Carbide, Non-Coolant Through, Straight, M...
|
Mfr. #: 497912005CT
|
WIDIA HANITA | $123.19 | In Stock |
|
|
Roughing End Mill, 20 mm, Carbide
Roughing End Mill, 20 mm Milling Dia., Carbide, Weldon Flat, Metric, 0.0394 in,...
|
Mfr. #: 490920007WW
|
WIDIA HANITA | $201.78 | In Stock |
|
|
Roughing End Mill, 20 mm, Carbide
Roughing End Mill, 20 mm Milling Dia., Carbide, Non-Coolant Through, Straight, M...
|
Mfr. #: 497920007..
|
WIDIA HANITA | $229.39 | In Stock |
|
|
Roughing End Mill, 8 mm, Carbide
Roughing End Mill, 8 mm Milling Dia., Carbide, Weldon Flat, Metric, 0.0024 in, 1...
|
Mfr. #: 490908003WW
|
WIDIA HANITA | $48.31 | In Stock |
Roughing Mill: Carbide,
188 products available
| Image | Product Name | Mfr # | Brand | Price | Availability |
|---|---|---|---|---|---|
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 1-1/4" LOC, 0.03" Rad, 3" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.03...
|
Mfr. #: 124010
|
APPROVED VENDOR | $88.65 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 1-1/4" LOC, 0.03" Rad, 3" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.03...
|
Mfr. #: 118988
|
APPROVED VENDOR | $90.79 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 1-1/4" LOC, 0.045" Rad, 3" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.045...
|
Mfr. #: 125965
|
APPROVED VENDOR | $85.42 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 1-1/4" LOC, 0.045" Rad, 3" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.045...
|
Mfr. #: 125958
|
APPROVED VENDOR | $88.67 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 1-1/4" LOC, 0.06" Rad, 3" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.06...
|
Mfr. #: 124078
|
APPROVED VENDOR | $88.80 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 1-1/4" LOC, 0.08" Rad, 3" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.08...
|
Mfr. #: 120664
|
APPROVED VENDOR | $85.90 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 1-1/4" LOC, 0.08" Rad, 3" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.08...
|
Mfr. #: 118695
|
APPROVED VENDOR | $87.70 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 1-1/4" LOC, 0.09" Rad, 3" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.09...
|
Mfr. #: 125959
|
APPROVED VENDOR | $93.22 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 1-1/4" LOC, 0.09" Rad, 3" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.09...
|
Mfr. #: 125975
|
APPROVED VENDOR | $95.05 | In Stock |
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 1" LOC, 0.04" Chf, 3" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Non-Coolant Through,...
|
Mfr. #: 4A0R13005
|
WIDIA HANITA | $141.79 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 2-1/4" LOC, 0.015" Rad, 4" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.015...
|
Mfr. #: 125637
|
APPROVED VENDOR | $120.14 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 2-1/4" LOC, 0.015" Rad, 4" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.015...
|
Mfr. #: 125669
|
APPROVED VENDOR | $124.39 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 2-1/4" LOC, 0.03" Rad, 4" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.03...
|
Mfr. #: 125670
|
APPROVED VENDOR | $124.40 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 2-1/4" LOC, 0.03" Rad, 4" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.03...
|
Mfr. #: 125992
|
APPROVED VENDOR | $120.14 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 2-1/4" LOC, 0.045" Rad, 4" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.045...
|
Mfr. #: 125976
|
APPROVED VENDOR | $124.40 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 2-1/4" LOC, 0.06" Rad, 4" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.06...
|
Mfr. #: 125671
|
APPROVED VENDOR | $124.64 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 2-1/4" LOC, 0.06" Rad, 4" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.06...
|
Mfr. #: 125993
|
APPROVED VENDOR | $120.14 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 2-1/4" LOC, 0.08" Rad, 4" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.08...
|
Mfr. #: 125638
|
APPROVED VENDOR | $115.55 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 2-1/4" LOC, 0.08" Rad, 4" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.08...
|
Mfr. #: 125672
|
APPROVED VENDOR | $119.29 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 2-1/4" LOC, 0.09" Rad, 4" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.09...
|
Mfr. #: 125977
|
APPROVED VENDOR | $129.30 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 2-1/4" LOC, 0.09" Rad, 4" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.09...
|
Mfr. #: 125994
|
APPROVED VENDOR | $120.14 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 2-1/4" LOC, 4" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Length of C...
|
Mfr. #: 125628
|
APPROVED VENDOR | $137.77 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 2" LOC, 0.04" Chf, 4-1/2" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Non-Coolant Through,...
|
Mfr. #: 4A1R13005
|
WIDIA HANITA | $227.74 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 5/8" LOC, 0.04" Chf, 2-1/2" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Non-Coolant Through,...
|
Mfr. #: 4A4R13005
|
WIDIA HANITA | $140.53 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/4" Mill Dia, 1-1/8" LOC, 0.01" Rad, 3" OAL
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.01...
|
Mfr. #: 125631
|
APPROVED VENDOR | $53.20 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/4" Mill Dia, 1-1/8" LOC, 0.01" Rad, 3" OAL
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.01...
|
Mfr. #: 125663
|
APPROVED VENDOR | $53.84 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/4" Mill Dia, 1-1/8" LOC, 0.015" Rad, 3" OAL
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.01...
|
Mfr. #: 125968
|
APPROVED VENDOR | $58.36 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/4" Mill Dia, 1-1/8" LOC, 0.015" Rad, 3" OAL
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.01...
|
Mfr. #: 125986
|
APPROVED VENDOR | $57.67 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/4" Mill Dia, 1-1/8" LOC, 0.03" Rad, 3" OAL
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.03...
|
Mfr. #: 125987
|
APPROVED VENDOR | $57.67 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/4" Mill Dia, 1-1/8" LOC, 0.03" Rad, 3" OAL
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.03...
|
Mfr. #: 125969
|
APPROVED VENDOR | $57.23 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/4" Mill Dia, 1-1/8" LOC, 0.04" Rad, 3" OAL
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.04...
|
Mfr. #: 125632
|
APPROVED VENDOR | $55.50 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/4" Mill Dia, 1-1/8" LOC, 0.04" Rad, 3" OAL
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.04...
|
Mfr. #: 125664
|
APPROVED VENDOR | $56.18 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/4" Mill Dia, 1-1/8" LOC, 3" OAL
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Straight, Length of...
|
Mfr. #: 125625
|
APPROVED VENDOR | $63.86 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/4" Mill Dia, 3/4" LOC, 0.01" Rad, 2-1/2" OAL
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.01...
|
Mfr. #: 118483
|
APPROVED VENDOR | $41.46 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/4" Mill Dia, 3/4" LOC, 0.01" Rad, 2-1/2" OAL
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.01...
|
Mfr. #: 120654
|
APPROVED VENDOR | $41.24 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/4" Mill Dia, 3/4" LOC, 0.015" Rad, 2-1/2" OAL
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.01...
|
Mfr. #: 125967
|
APPROVED VENDOR | $44.91 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/4" Mill Dia, 3/4" LOC, 0.015" Rad, 2-1/2" OAL
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.01...
|
Mfr. #: 125985
|
APPROVED VENDOR | $44.71 | In Stock |
|
Roughing End Mill: Carbide, 3 Flute, 1/4" Mill Dia, 3/4" LOC, 0.024" Chf, 2-1/2" OAL
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Non-Coolant Through,...
|
Mfr. #: 4A0R07002
|
WIDIA HANITA | $77.25 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/4" Mill Dia, 3/4" LOC, 0.03" Rad, 2-1/2" OAL
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.03...
|
Mfr. #: 124047
|
APPROVED VENDOR | $44.81 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/4" Mill Dia, 3/4" LOC, 0.03" Rad, 2-1/2" OAL
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.03...
|
Mfr. #: 122493
|
APPROVED VENDOR | $44.99 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/4" Mill Dia, 3/4" LOC, 0.04" Rad, 2-1/2" OAL
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.04...
|
Mfr. #: 118484
|
APPROVED VENDOR | $43.49 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 1/4" Mill Dia, 3/4" LOC, 0.04" Rad, 2-1/2" OAL
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.04...
|
Mfr. #: 120655
|
APPROVED VENDOR | $43.49 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/16" Mill Dia, 5/8" LOC, 0.01" Rad, 2" OAL
Roughing End Mill, 0.1875 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0....
|
Mfr. #: 118482
|
APPROVED VENDOR | $38.46 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/16" Mill Dia, 5/8" LOC, 0.01" Rad, 2" OAL
Roughing End Mill, 0.1875 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0....
|
Mfr. #: 120651
|
APPROVED VENDOR | $39.79 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/16" Mill Dia, 5/8" LOC, 0.015" Rad, 2" OAL
Roughing End Mill, 0.1875 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0....
|
Mfr. #: 125966
|
APPROVED VENDOR | $38.46 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/16" Mill Dia, 5/8" LOC, 0.015" Rad, 2" OAL
Roughing End Mill, 0.1875 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0....
|
Mfr. #: 125984
|
APPROVED VENDOR | $39.79 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/4" Mill Dia, 1-1/2" LOC, 0.04" Chf, 4" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Non-Coolant Through,...
|
Mfr. #: 4A0R19007
|
WIDIA HANITA | $322.97 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/4" Mill Dia, 1-5/8" LOC, 0.06" Rad, 4" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.06...
|
Mfr. #: 118489
|
APPROVED VENDOR | $211.55 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/4" Mill Dia, 1-5/8" LOC, 0.09" Rad, 4" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.09...
|
Mfr. #: 125956
|
APPROVED VENDOR | $211.57 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/4" Mill Dia, 2-1/2" LOC, 0.03" Rad, 5" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.03...
|
Mfr. #: 125641
|
APPROVED VENDOR | $261.20 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/4" Mill Dia, 2-1/2" LOC, 0.03" Rad, 5" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.03...
|
Mfr. #: 125676
|
APPROVED VENDOR | $265.91 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/4" Mill Dia, 2-1/2" LOC, 0.06" Rad, 5" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.06...
|
Mfr. #: 125642
|
APPROVED VENDOR | $261.22 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/4" Mill Dia, 2-1/2" LOC, 0.06" Rad, 5" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.06...
|
Mfr. #: 125982
|
APPROVED VENDOR | $265.91 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/4" Mill Dia, 2-1/2" LOC, 0.09" Rad, 5" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.09...
|
Mfr. #: 125643
|
APPROVED VENDOR | $261.24 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/4" Mill Dia, 2-1/2" LOC, 0.09" Rad, 5" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.09...
|
Mfr. #: 125983
|
APPROVED VENDOR | $265.91 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/4" Mill Dia, 2-1/2" LOC, 0.12" Rad, 5" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.12...
|
Mfr. #: 125677
|
APPROVED VENDOR | $272.78 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/4" Mill Dia, 2-1/2" LOC, 0.12" Rad, 5" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.12...
|
Mfr. #: 125644
|
APPROVED VENDOR | $268.15 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/4" Mill Dia, 2-1/2" LOC, 5" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Straight, Length of...
|
Mfr. #: 125630
|
APPROVED VENDOR | $299.10 | In Stock |
|
Roughing End Mill: Carbide, 3 Flute, 3/4" Mill Dia, 2-1/4" LOC, 0.04" Chf, 5" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Non-Coolant Through,...
|
Mfr. #: 4A1R19007
|
WIDIA HANITA | $459.08 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/8" Mill Dia, 1-1/2" LOC, 0.015" Rad, 4" OAL
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125635
|
APPROVED VENDOR | $77.29 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/8" Mill Dia, 1-1/2" LOC, 0.015" Rad, 4" OAL
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125667
|
APPROVED VENDOR | $84.70 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/8" Mill Dia, 1-1/2" LOC, 0.03" Rad, 4" OAL
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125974
|
APPROVED VENDOR | $84.70 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/8" Mill Dia, 1-1/2" LOC, 0.03" Rad, 4" OAL
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125991
|
APPROVED VENDOR | $82.23 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/8" Mill Dia, 1-1/2" LOC, 0.06" Rad, 4" OAL
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125636
|
APPROVED VENDOR | $80.42 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/8" Mill Dia, 1-1/2" LOC, 0.06" Rad, 4" OAL
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125668
|
APPROVED VENDOR | $87.37 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/8" Mill Dia, 1-1/2" LOC, 4" OAL
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Straight, Length of...
|
Mfr. #: 125627
|
APPROVED VENDOR | $91.30 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/8" Mill Dia, 1" LOC, 0.03" Rad, 2-1/2" OAL
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 120499
|
APPROVED VENDOR | $61.48 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/8" Mill Dia, 1" LOC, 0.03" Rad, 2-1/2" OAL
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 121652
|
APPROVED VENDOR | $59.96 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 3/8" Mill Dia, 7/8" LOC, 0.024" Chf, 2-1/2" OAL
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Non-Coolant Through...
|
Mfr. #: 4A0R10004
|
WIDIA HANITA | $103.99 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/16" Mill Dia, 1-1/8" LOC, 0.01" Rad, 3" OAL
Roughing End Mill, 0.3125 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0....
|
Mfr. #: 125633
|
APPROVED VENDOR | $55.47 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/16" Mill Dia, 1-1/8" LOC, 0.01" Rad, 3" OAL
Roughing End Mill, 0.3125 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0....
|
Mfr. #: 125665
|
APPROVED VENDOR | $57.03 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/16" Mill Dia, 1-1/8" LOC, 0.015" Rad, 3" OAL
Roughing End Mill, 0.3125 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0....
|
Mfr. #: 125972
|
APPROVED VENDOR | $61.79 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/16" Mill Dia, 1-1/8" LOC, 0.015" Rad, 3" OAL
Roughing End Mill, 0.3125 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0....
|
Mfr. #: 125989
|
APPROVED VENDOR | $60.58 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/16" Mill Dia, 1-1/8" LOC, 0.03" Rad, 3" OAL
Roughing End Mill, 0.3125 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0....
|
Mfr. #: 125973
|
APPROVED VENDOR | $61.79 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/16" Mill Dia, 1-1/8" LOC, 0.03" Rad, 3" OAL
Roughing End Mill, 0.3125 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0....
|
Mfr. #: 125990
|
APPROVED VENDOR | $60.58 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/16" Mill Dia, 1-1/8" LOC, 0.05" Rad, 3" OAL
Roughing End Mill, 0.3125 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0....
|
Mfr. #: 125634
|
APPROVED VENDOR | $58.67 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/16" Mill Dia, 1-1/8" LOC, 0.05" Rad, 3" OAL
Roughing End Mill, 0.3125 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0....
|
Mfr. #: 125666
|
APPROVED VENDOR | $59.94 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/16" Mill Dia, 1-1/8" LOC, 3" OAL
Roughing End Mill, 0.3125 in Milling Dia., Carbide, Uncoated, Straight, Length o...
|
Mfr. #: 125626
|
APPROVED VENDOR | $67.15 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/16" Mill Dia, 3/4" LOC, 0.015" Rad
Roughing End Mill, 0.3125 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0....
|
Mfr. #: 125970
|
APPROVED VENDOR | $52.51 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/16" Mill Dia, 3/4" LOC, 0.015" Rad
Roughing End Mill, 0.3125 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0....
|
Mfr. #: 125988
|
APPROVED VENDOR | $51.96 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/16" Mill Dia, 3/4" LOC, 0.03" Rad, 2-1/2" OAL
Roughing End Mill, 0.3125 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0....
|
Mfr. #: 122494
|
APPROVED VENDOR | $52.51 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/16" Mill Dia, 3/4" LOC, 0.03" Rad, 2-1/2" OAL
Roughing End Mill, 0.3125 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0....
|
Mfr. #: 125960
|
APPROVED VENDOR | $52.00 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/16" Mill Dia, 3/4" LOC, 0.05" Rad, 2-1/2" OAL
Roughing End Mill, 0.3125 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0....
|
Mfr. #: 118486
|
APPROVED VENDOR | $51.24 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/16" Mill Dia, 3/4" LOC, 0.05" Rad, 2-1/2" OAL
Roughing End Mill, 0.3125 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0....
|
Mfr. #: 120658
|
APPROVED VENDOR | $49.62 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 1-1/4" LOC, 0.04" Chf, 3-1/2" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Non-Coolant Through...
|
Mfr. #: 4A0R16006
|
WIDIA HANITA | $204.87 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 1-5/8" LOC, 0.015" Rad
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125978
|
APPROVED VENDOR | $144.19 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 1-5/8" LOC, 0.015" Rad
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125995
|
APPROVED VENDOR | $140.43 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 1-5/8" LOC, 0.02" Rad
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 118487
|
APPROVED VENDOR | $133.04 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 1-5/8" LOC, 0.02" Rad
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 120666
|
APPROVED VENDOR | $129.58 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 1-5/8" LOC, 0.03" Rad
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125020
|
APPROVED VENDOR | $144.21 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 1-5/8" LOC, 0.03" Rad
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125961
|
APPROVED VENDOR | $140.61 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 1-5/8" LOC, 0.045" Rad
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125957
|
APPROVED VENDOR | $144.37 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 1-5/8" LOC, 0.045" Rad
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125962
|
APPROVED VENDOR | $140.61 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 1-5/8" LOC, 0.06" Rad
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125963
|
APPROVED VENDOR | $140.61 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 1-5/8" LOC, 0.09" Rad
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 122562
|
APPROVED VENDOR | $144.39 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 1-5/8" LOC, 0.09" Rad
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125964
|
APPROVED VENDOR | $140.79 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 1-5/8" LOC, 0.1" Rad, 3-1/2" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.1...
|
Mfr. #: 120667
|
APPROVED VENDOR | $134.80 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 2-1/2" LOC, 0.02" Rad, 5" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125639
|
APPROVED VENDOR | $194.13 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 2-1/2" LOC, 0.02" Rad, 5" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125673
|
APPROVED VENDOR | $199.57 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 2-1/2" LOC, 0.03" Rad, 5" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125980
|
APPROVED VENDOR | $216.29 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 2-1/2" LOC, 0.03" Rad, 5" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125997
|
APPROVED VENDOR | $210.38 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 2-1/2" LOC, 0.06" Rad, 5" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125674
|
APPROVED VENDOR | $216.58 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 2-1/2" LOC, 0.06" Rad, 5" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125998
|
APPROVED VENDOR | $210.38 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 2-1/2" LOC, 0.09" Rad, 5" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125981
|
APPROVED VENDOR | $216.29 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 2-1/2" LOC, 0.09" Rad, 5" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 125999
|
APPROVED VENDOR | $210.38 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 2-1/2" LOC, 0.1" Rad, 5" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.1...
|
Mfr. #: 125640
|
APPROVED VENDOR | $199.36 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 2-1/2" LOC, 0.1" Rad, 5" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.1...
|
Mfr. #: 125675
|
APPROVED VENDOR | $205.11 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 2-1/2" LOC, 5" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Length of...
|
Mfr. #: 125629
|
APPROVED VENDOR | $240.34 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 2-1/4" LOC, 0.04" Chf, 5" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Non-Coolant Through...
|
Mfr. #: 4A1R16006
|
WIDIA HANITA | $343.33 | In Stock |
|
Roughing End Mill: Carbide, 3 Flute, Coarse Pitch, 1" Mill Dia, 1-1/2" LOC, 4" OAL
Roughing End Mill, 1 in Milling Dia., Carbide, Uncoated, Non-Coolant Through, We...
|
Mfr. #: C60469
|
CLEVELAND | $422.15 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, Coarse Pitch, 1" Mill Dia, 1-1/8" LOC, 3-1/2" OAL
Roughing End Mill, 1 in Milling Dia., Carbide, Uncoated, Non-Coolant Through, We...
|
Mfr. #: C60468
|
CLEVELAND | $402.98 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, Coarse Pitch, 1" Mill Dia, 2-1/4" LOC, 5" OAL
Roughing End Mill, 1 in Milling Dia., Carbide, Uncoated, Non-Coolant Through, We...
|
Mfr. #: C60470
|
CLEVELAND | $606.81 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, Coarse Pitch, 1/2" Mill Dia, 1" LOC, 3" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Non-Coolant Through,...
|
Mfr. #: C60460
|
CLEVELAND | $141.96 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, Coarse Pitch, 1/2" Mill Dia, 2" LOC, 4-1/2" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Non-Coolant Through,...
|
Mfr. #: C60461
|
CLEVELAND | $209.82 | In Stock |
|
Roughing End Mill: Carbide, 3 Flute, Coarse Pitch, 1/2" Mill Dia, 5/8" LOC, 2-1/2" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Non-Coolant Through,...
|
Mfr. #: C60459
|
CLEVELAND | $175.22 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, Coarse Pitch, 1/4" Mill Dia, 3/4" LOC, 2-1/2" OAL
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Non-Coolant Through,...
|
Mfr. #: C60456
|
CLEVELAND | $79.57 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, Coarse Pitch, 1/4" Mill Dia, 3/8" LOC, 2" OAL
Roughing End Mill, 0.25 in Milling Dia., Carbide, Uncoated, Non-Coolant Through,...
|
Mfr. #: C60455
|
CLEVELAND | $122.50 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, Coarse Pitch, 3/4" Mill Dia, 1-1/2" LOC, 4" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Non-Coolant Through,...
|
Mfr. #: C60466
|
CLEVELAND | $271.69 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, Coarse Pitch, 3/4" Mill Dia, 1" LOC, 3-1/2" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Non-Coolant Through,...
|
Mfr. #: C60465
|
CLEVELAND | $347.67 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, Coarse Pitch, 3/4" Mill Dia, 2-1/4" LOC, 5" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Non-Coolant Through,...
|
Mfr. #: C60467
|
CLEVELAND | $401.82 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, Coarse Pitch, 3/8" Mill Dia, 1/2" LOC, 2" OAL
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Non-Coolant Through...
|
Mfr. #: C60457
|
CLEVELAND | $148.87 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, Coarse Pitch, 3/8" Mill Dia, 7/8" LOC, 2-1/2" OAL
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Non-Coolant Through...
|
Mfr. #: C60458
|
CLEVELAND | $104.01 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, Coarse Pitch, 5/8" Mill Dia, 1-1/4" LOC, 3-1/2" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Non-Coolant Through...
|
Mfr. #: C60463
|
CLEVELAND | $212.80 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, Coarse Pitch, 5/8" Mill Dia, 2-1/4" LOC, 5" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Non-Coolant Through...
|
Mfr. #: C60464
|
CLEVELAND | $311.67 | In Stock |
|
|
Roughing End Mill: Carbide, 3 Flute, Coarse Pitch, 5/8" Mill Dia, 3/4" LOC, 3" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Non-Coolant Through...
|
Mfr. #: C60462
|
CLEVELAND | $261.57 | In Stock |
|
Roughing End Mill: Carbide, 5 Flute, 1" Mill Dia, 3" LOC, 0.03" Rad, 5-1/2" OAL
Roughing End Mill, 1 in Milling Dia., Carbide, Uncoated, Coolant Through, Straig...
|
Mfr. #: 150018
|
APPROVED VENDOR | $817.39 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 1" Mill Dia, 3" LOC, 0.03" Rad, 5-1/2" OAL
Roughing End Mill, 1 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.03 in...
|
Mfr. #: 150218
|
APPROVED VENDOR | $330.65 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 1" Mill Dia, 3" LOC, 0.06" Rad, 5-1/2" OAL
Roughing End Mill, 1 in Milling Dia., Carbide, Uncoated, Coolant Through, Straig...
|
Mfr. #: 150019
|
APPROVED VENDOR | $817.42 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 1" Mill Dia, 3" LOC, 0.06" Rad, 5-1/2" OAL
Roughing End Mill, 1 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.06 in...
|
Mfr. #: 150219
|
APPROVED VENDOR | $330.69 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 1" Mill Dia, 3" LOC, 0.09" Rad, 5-1/2" OAL
Roughing End Mill, 1 in Milling Dia., Carbide, Uncoated, Coolant Through, Straig...
|
Mfr. #: 150020
|
APPROVED VENDOR | $817.47 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 1" Mill Dia, 3" LOC, 0.09" Rad, 5-1/2" OAL
Roughing End Mill, 1 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.09 in...
|
Mfr. #: 150220
|
APPROVED VENDOR | $331.37 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 1" Mill Dia, 3" LOC, 5-1/2" OAL
Roughing End Mill, 1 in Milling Dia., Carbide, Uncoated, Coolant Through, Straig...
|
Mfr. #: 150017
|
APPROVED VENDOR | $919.06 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 1" Mill Dia, 3" LOC, 5-1/2" OAL
Roughing End Mill, 1 in Milling Dia., Carbide, Uncoated, Straight, Length of Cut...
|
Mfr. #: 150217
|
APPROVED VENDOR | $374.22 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 1/2" Mill Dia, 1-1/2" LOC, 0.015" Rad
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Coolant Through, Stra...
|
Mfr. #: 150006
|
APPROVED VENDOR | $200.87 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 1/2" Mill Dia, 1-1/2" LOC, 0.015" Rad
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.015...
|
Mfr. #: 150206
|
APPROVED VENDOR | $107.38 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 1/2" Mill Dia, 1-1/2" LOC, 0.03" Rad
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Coolant Through, Stra...
|
Mfr. #: 150007
|
APPROVED VENDOR | $201.00 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 1/2" Mill Dia, 1-1/2" LOC, 0.03" Rad
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.03...
|
Mfr. #: 150207
|
APPROVED VENDOR | $107.52 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 1/2" Mill Dia, 1-1/2" LOC, 0.06" Rad
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Coolant Through, Stra...
|
Mfr. #: 150008
|
APPROVED VENDOR | $204.55 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 1/2" Mill Dia, 1-1/2" LOC, 0.06" Rad
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.06...
|
Mfr. #: 150208
|
APPROVED VENDOR | $111.24 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 1/2" Mill Dia, 1-1/2" LOC, 3-1/2" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Coolant Through, Stra...
|
Mfr. #: 150005
|
APPROVED VENDOR | $226.85 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 1/2" Mill Dia, 1-1/2" LOC, 3-1/2" OAL
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Length of C...
|
Mfr. #: 150205
|
APPROVED VENDOR | $120.17 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 3/4" Mill Dia, 2-1/4" LOC, 0.03" Rad, 5" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Coolant Through, Str...
|
Mfr. #: 150014
|
APPROVED VENDOR | $419.98 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 3/4" Mill Dia, 2-1/4" LOC, 0.03" Rad, 5" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.03...
|
Mfr. #: 150214
|
APPROVED VENDOR | $210.67 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 3/4" Mill Dia, 2-1/4" LOC, 0.06" Rad, 5" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Coolant Through, Str...
|
Mfr. #: 150015
|
APPROVED VENDOR | $420.00 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 3/4" Mill Dia, 2-1/4" LOC, 0.06" Rad, 5" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.06...
|
Mfr. #: 150215
|
APPROVED VENDOR | $210.67 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 3/4" Mill Dia, 2-1/4" LOC, 0.09" Rad, 5" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Coolant Through, Str...
|
Mfr. #: 150016
|
APPROVED VENDOR | $424.71 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 3/4" Mill Dia, 2-1/4" LOC, 0.09" Rad, 5" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.09...
|
Mfr. #: 150216
|
APPROVED VENDOR | $215.24 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 3/4" Mill Dia, 2-1/4" LOC, 5" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Coolant Through, Str...
|
Mfr. #: 150013
|
APPROVED VENDOR | $475.51 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 3/4" Mill Dia, 2-1/4" LOC, 5" OAL
Roughing End Mill, 0.75 in Milling Dia., Carbide, Uncoated, Straight, Length of...
|
Mfr. #: 150213
|
APPROVED VENDOR | $239.51 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 3/8" Mill Dia, 1-1/8" LOC, 0.015" Rad, 3" OAL
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Coolant Through, St...
|
Mfr. #: 150002
|
APPROVED VENDOR | $111.53 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 3/8" Mill Dia, 1-1/8" LOC, 0.015" Rad, 3" OAL
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 150202
|
APPROVED VENDOR | $76.18 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 3/8" Mill Dia, 1-1/8" LOC, 0.03" Rad, 3" OAL
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Coolant Through, St...
|
Mfr. #: 150003
|
APPROVED VENDOR | $111.53 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 3/8" Mill Dia, 1-1/8" LOC, 0.03" Rad, 3" OAL
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 150203
|
APPROVED VENDOR | $76.29 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 3/8" Mill Dia, 1-1/8" LOC, 0.06" Rad, 3" OAL
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Coolant Through, St...
|
Mfr. #: 150004
|
APPROVED VENDOR | $118.80 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 3/8" Mill Dia, 1-1/8" LOC, 0.06" Rad, 3" OAL
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 150204
|
APPROVED VENDOR | $83.50 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 3/8" Mill Dia, 1-1/8" LOC, 3" OAL
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Straight, Length of...
|
Mfr. #: 150201
|
APPROVED VENDOR | $81.00 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 3/8" Mill Dia, 1-1/8" LOC, 3" OAL
Roughing End Mill, 0.375 in Milling Dia., Carbide, Uncoated, Coolant Through, St...
|
Mfr. #: 150001
|
APPROVED VENDOR | $121.40 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 5/8" Mill Dia, 1-7/8" LOC, 0.03" Rad, 4" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Coolant Through, St...
|
Mfr. #: 150010
|
APPROVED VENDOR | $287.15 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 5/8" Mill Dia, 1-7/8" LOC, 0.03" Rad, 4" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 150210
|
APPROVED VENDOR | $172.17 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 5/8" Mill Dia, 1-7/8" LOC, 0.06" Rad, 4" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Coolant Through, St...
|
Mfr. #: 150011
|
APPROVED VENDOR | $287.19 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 5/8" Mill Dia, 1-7/8" LOC, 0.06" Rad, 4" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 150211
|
APPROVED VENDOR | $172.18 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 5/8" Mill Dia, 1-7/8" LOC, 0.09" Rad, 4" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Coolant Through, St...
|
Mfr. #: 150012
|
APPROVED VENDOR | $292.21 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 5/8" Mill Dia, 1-7/8" LOC, 0.09" Rad, 4" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Inch, 0.0...
|
Mfr. #: 150212
|
APPROVED VENDOR | $177.12 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 5/8" Mill Dia, 1-7/8" LOC, 4" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Coolant Through, St...
|
Mfr. #: 150009
|
APPROVED VENDOR | $315.18 | In Stock |
|
|
Roughing End Mill: Carbide, 5 Flute, 5/8" Mill Dia, 1-7/8" LOC, 4" OAL
Roughing End Mill, 0.625 in Milling Dia., Carbide, Uncoated, Straight, Length of...
|
Mfr. #: 150209
|
APPROVED VENDOR | $195.08 | In Stock |
|
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, 1" Mill Dia, 1-1/2" LOC, 0.04" Chf
Roughing End Mill, 1 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Weldon...
|
Mfr. #: TC4A0R25008
|
WIDIA HANITA | $591.32 | In Stock |
|
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, 1" Mill Dia, 2-1/4" LOC, 0.04" Chf
Roughing End Mill, 1 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Weldon...
|
Mfr. #: TC4A1R25008
|
WIDIA HANITA | $763.29 | In Stock |
|
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, 1/2" Mill Dia, 1" LOC, 0.04" Chf
Roughing End Mill, 0.5 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Weld...
|
Mfr. #: TC4A0R13005
|
WIDIA HANITA | $169.36 | In Stock |
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, 1/4" Mill Dia, 3/4" LOC, 0.024" Chf
Roughing End Mill, 0.25 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Str...
|
Mfr. #: TC4A0R07002
|
WIDIA HANITA | $97.95 | In Stock |
|
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, 3/4" Mill Dia, 1-1/2" LOC, 0.04" Chf
Roughing End Mill, 0.75 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Wel...
|
Mfr. #: TC4A0R19007
|
WIDIA HANITA | $353.40 | In Stock |
|
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, 3/4" Mill Dia, 2-1/4" LOC, 0.04" Chf
Roughing End Mill, 0.75 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Wel...
|
Mfr. #: TC4A1R19007
|
WIDIA HANITA | $572.47 | In Stock |
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, 3/8" Mill Dia, 7/8" LOC, 0.024" Chf
Roughing End Mill, 0.375 in Milling Dia., Carbide, TiCN, Non-Coolant Through, We...
|
Mfr. #: TC4A0R10004
|
WIDIA HANITA | $125.23 | In Stock |
|
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, Coarse Pitch, 1" Mill Dia, 1-1/2" LOC
Roughing End Mill, 1 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Weldon...
|
Mfr. #: C70469
|
CLEVELAND | $507.83 | In Stock |
|
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, Coarse Pitch, 1" Mill Dia, 1-1/8" LOC
Roughing End Mill, 1 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Weldon...
|
Mfr. #: C70468
|
CLEVELAND | $442.00 | In Stock |
|
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, Coarse Pitch, 1" Mill Dia, 2-1/4" LOC
Roughing End Mill, 1 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Weldon...
|
Mfr. #: C70470
|
CLEVELAND | $730.00 | In Stock |
|
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, Coarse Pitch, 1/2" Mill Dia, 1" LOC
Roughing End Mill, 0.5 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Weld...
|
Mfr. #: C70460
|
CLEVELAND | $167.70 | In Stock |
|
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, Coarse Pitch, 1/2" Mill Dia, 2" LOC
Roughing End Mill, 0.5 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Weld...
|
Mfr. #: C70461
|
CLEVELAND | $252.40 | In Stock |
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, Coarse Pitch, 1/2" Mill Dia, 5/8" LOC
Roughing End Mill, 0.5 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Weld...
|
Mfr. #: C70459
|
CLEVELAND | $199.31 | In Stock |
|
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, Coarse Pitch, 1/4" Mill Dia, 3/4" LOC
Roughing End Mill, 0.25 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Wel...
|
Mfr. #: C70456
|
CLEVELAND | $95.70 | In Stock |
|
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, Coarse Pitch, 1/4" Mill Dia, 3/8" LOC
Roughing End Mill, 0.25 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Wel...
|
Mfr. #: C70455
|
CLEVELAND | $135.70 | In Stock |
|
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, Coarse Pitch, 3/4" Mill Dia, 1-1/2" LOC
Roughing End Mill, 0.75 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Wel...
|
Mfr. #: C70466
|
CLEVELAND | $326.85 | In Stock |
|
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, Coarse Pitch, 3/4" Mill Dia, 1" LOC
Roughing End Mill, 0.75 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Wel...
|
Mfr. #: C70465
|
CLEVELAND | $375.14 | In Stock |
|
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, Coarse Pitch, 3/4" Mill Dia, 2-1/4" LOC
Roughing End Mill, 0.75 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Wel...
|
Mfr. #: C70467
|
CLEVELAND | $474.69 | In Stock |
|
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, Coarse Pitch, 3/8" Mill Dia, 1/2" LOC
Roughing End Mill, 0.375 in Milling Dia., Carbide, TiCN, Non-Coolant Through, We...
|
Mfr. #: C70457
|
CLEVELAND | $166.71 | In Stock |
|
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, Coarse Pitch, 3/8" Mill Dia, 7/8" LOC
Roughing End Mill, 0.375 in Milling Dia., Carbide, TiCN, Non-Coolant Through, We...
|
Mfr. #: C70458
|
CLEVELAND | $125.09 | In Stock |
|
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, Coarse Pitch, 5/8" Mill Dia, 1-1/4" LOC
Roughing End Mill, 0.625 in Milling Dia., Carbide, TiCN, Non-Coolant Through, We...
|
Mfr. #: C70463
|
CLEVELAND | $256.05 | In Stock |
|
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, Coarse Pitch, 5/8" Mill Dia, 2-1/4" LOC
Roughing End Mill, 0.625 in Milling Dia., Carbide, TiCN, Non-Coolant Through, We...
|
Mfr. #: C70464
|
CLEVELAND | $374.97 | In Stock |
|
|
Roughing End Mill: Carbide, TiCN Coated, 3 Flute, Coarse Pitch, 5/8" Mill Dia, 3/4" LOC
Roughing End Mill, 0.625 in Milling Dia., Carbide, TiCN, Non-Coolant Through, We...
|
Mfr. #: C70462
|
CLEVELAND | $297.20 | In Stock |
Mill, Single End,
1 product available
| Image | Product Name | Mfr # | Brand | Price | Availability |
|---|---|---|---|---|---|
|
|
Sq. End Mill, Single End, Carb, 1/2"
Roughing End Mill, 0.5 in Milling Dia., Carbide, Uncoated, Straight, Length of C...
|
Mfr. #: 13450000
|
M.A. FORD | $148.24 | In Stock |
Products
Showing 1-8 of 260 results
Table view with product grouping is available when browsing category groups.