WIDIA HANITA
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
287RP3
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
48HZ63
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
48HZ64
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
48HZ62
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
48HZ66
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
48HZ65
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
785UL2
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
48JA42
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
48JA43
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
785UN0
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
48JA01
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
48JA02
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
785UP9
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
785UR0
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
48JA27
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
48JA26
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
287RP2
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
48HZ91
Corner Radius End Mill, 0.25 in Milling Dia., Carbide, AlTiN, Non-Coolant Throug...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
48HZ92
Corner Radius End Mill, 0.25 in Milling Dia., Carbide, AlTiN, Non-Coolant Throug...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
785UK4
Corner Radius End Mill, 0.25 in Milling Dia., Carbide, AlTiN, Non-Coolant Throug...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
785UK3
Corner Radius End Mill, 0.25 in Milling Dia., Carbide, AlTiN, Non-Coolant Throug...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
48HZ47
Corner Radius End Mill, 0.25 in Milling Dia., Carbide, AlTiN, Non-Coolant Throug...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
48HZ46
Corner Radius End Mill, 0.25 in Milling Dia., Carbide, AlTiN, Non-Coolant Throug...
Corner Radius End Mill: Carbide, AlTiN Coated, 4 F...
48HZ45
Corner Radius End Mill, 0.25 in Milling Dia., Carbide, AlTiN, Non-Coolant Throug...