WIDIA HANITA
Cor Rad End Mill, 1/2", Carb, 0.0900" rad
KD-0118491
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Cor Rad End Mill, 1/2", Carb, 0.0900" rad
KD-0118492
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Cor Rad End Mill, 1/2", Carb, 0.0900" rad
KD-0118447
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Cor Rad End Mill, 1/2", Carb, 0.1200" rad
KD-0118310
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Cor Rad End Mill, 1/2", Carb, 0.1200" rad
KD-0118449
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Cor Rad End Mill, 1/2", Carb, 0.1200" rad
KD-0118451
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Cor Rad End Mill, 1/2", Carb, 0.1200" rad
KD-0118462
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Cor Rad End Mill, 1/2", Carb, 0.1200" rad
KD-0120144
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Cor Rad End Mill, 1/2", Carb, 0.1200" rad
KD-0118468
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Cor Rad End Mill, 1/2", Carb, 0.1200" rad
KD-0118489
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Cor Rad End Mill, 1/2", Carb, 0.1200" rad
KD-0118494
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through...
Cor Rad End Mill, 1/2", Carb, 0.1200" rad
KD-0122088
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, Non-Coolant Through, Strai...
Cor Rad End Mill, 1/2", Carb, 0.1200" rad
KD-0122249
Corner Radius End Mill, 0.5 in Milling Dia., Carbide, Non-Coolant Through, Strai...
Cor Rad End Mill, 1/4", Carb, 0.0150" rad
KD-0118471
Corner Radius End Mill, 0.25 in Milling Dia., Carbide, AlTiN, Non-Coolant Throug...
Cor Rad End Mill, 1/4", Carb, 0.0150" rad
KD-0118293
Corner Radius End Mill, 0.25 in Milling Dia., Carbide, AlTiN, Non-Coolant Throug...
Cor Rad End Mill, 1/4", Carb, 0.0150" rad
KD-0118300
Corner Radius End Mill, 0.25 in Milling Dia., Carbide, AlTiN, Non-Coolant Throug...
Cor Rad End Mill, 1/4", Carb, 0.0150" rad
KD-0118424
Corner Radius End Mill, 0.25 in Milling Dia., Carbide, AlTiN, Non-Coolant Throug...
Cor Rad End Mill, 1/4", Carb, 0.0150" rad
KD-0118436
Corner Radius End Mill, 0.25 in Milling Dia., Carbide, AlTiN, Non-Coolant Throug...
Cor Rad End Mill, 1/4", Carb, 0.0150" rad
KD-0118454
Corner Radius End Mill, 0.25 in Milling Dia., Carbide, AlTiN, Non-Coolant Throug...
Cor Rad End Mill, 1/4", Carb, 0.0150" rad
KD-0117263
Corner Radius End Mill, 0.25 in Milling Dia., Carbide, Non-Coolant Through, Stra...
Cor Rad End Mill, 1/4", Carb, 0.0150" rad
KD-0117312
Corner Radius End Mill, 0.25 in Milling Dia., Carbide, Non-Coolant Through, Stra...
Cor Rad End Mill, 1/4", Carb, 0.0180" rad
KD-0116455
Corner Radius End Mill, 0.25 in Milling Dia., Carbide, Non-Coolant Through, Stra...
Cor Rad End Mill, 1/4", Carb, 0.0200" rad
KD-0117317
Corner Radius End Mill, 0.25 in Milling Dia., Carbide, Non-Coolant Through, Stra...
Cor Rad End Mill, 1/4", Carb, 0.0300" rad
KD-0118292
Corner Radius End Mill, 0.25 in Milling Dia., Carbide, AlTiN, Non-Coolant Throug...