OSG
Taper Length Drill, 9.30mm, Carbide
Taper Length Drill Bit, Drill Bit Size 9.3 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 9.40mm, Carbide
Taper Length Drill Bit, Drill Bit Size 9.4 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 9.50mm, Carbide
Taper Length Drill Bit, Drill Bit Size 9.5 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 9.50mm, Carbide
Taper Length Drill Bit, Drill Bit Size 9.5 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 9.60mm, Carbide
Taper Length Drill Bit, Drill Bit Size 9.6 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 9.70mm, Carbide
Taper Length Drill Bit, Drill Bit Size 9.7 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 9.90mm, Carbide
Taper Length Drill Bit, Drill Bit Size 9.9 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 9/16", Carbide
Taper Length Drill Bit, Drill Bit Size 9/16 in, Drill Bit Point Angle 140 Degree...
Taper Length Drill, 9/16", Carbide
Taper Length Drill Bit, Drill Bit Size 9/16 in, Drill Bit Point Angle 140 Degree...
Taper Length Drill, 9/32", Carbide
Taper Length Drill Bit, Drill Bit Size 9/32 in, Drill Bit Point Angle 140 Degree...
Taper Length Drill, 9/32", Carbide
Taper Length Drill Bit, Drill Bit Size 9/32 in, Drill Bit Point Angle 140 Degree...
Taper Length Drill, 9/64", Carbide
Taper Length Drill Bit, Drill Bit Size 9/64 in, Drill Bit Point Angle 140 Degree...
Taper Length Drill, F, Carbide
Taper Length Drill Bit, Drill Bit Size F, Drill Bit Point Angle 140 Degrees , R...
Taper Length Drill, F, Carbide
Taper Length Drill Bit, Drill Bit Size F, Drill Bit Point Angle 140 Degrees , X...
Taper Length Drill, I, Carbide
Taper Length Drill Bit, Drill Bit Size I, Drill Bit Point Angle 140 Degrees , R...
Taper Length Drill, P, Carbide
Taper Length Drill Bit, Drill Bit Size P, Drill Bit Point Angle 140 Degrees , R...
Taper Length Drill, Q, Carbide
Taper Length Drill Bit, Drill Bit Size Q, Drill Bit Point Angle 140 Degrees , R...
Taper Length Drill, Q, Carbide
Taper Length Drill Bit, Drill Bit Size Q, Drill Bit Point Angle 140 Degrees , X...
Taper Length Drill, W, Carbide
Taper Length Drill Bit, Drill Bit Size W, Drill Bit Point Angle 140 Degrees , R...
Tapered End Mill: Carbide, WXS Coated, 4 Flute, 0....
Tapered End Mill, 4 mm, Carbide
Tapered End Mill: Carbide, WXS Coated, 4 Flute, 0....
Tapered End Mill, Tapered, Carbide, 0.5 Degrees Taper Angle per Side, 5/64 in Ti...
Tapered End Mill: Carbide, WXS Coated, 4 Flute, 0....
Tapered End Mill, Tapered, Carbide, 0.5 Degrees Taper Angle per Side, 5/64 in Ti...
Tapered End Mill: Carbide, WXS Coated, 4 Flute, 0....
Tapered End Mill, Tapered, Carbide, 0.7 Degrees Taper Angle per Side, 5/64 in Ti...
Tapered End Mill: Carbide, WXS Coated, 4 Flute, 0....
Tapered End Mill, Tapered, Carbide, 0.7 Degrees Taper Angle per Side, 5/64 in Ti...