OSG
Sq. End Mill, Single End, Carb, 0.40mm
Square End Mill, 0.4 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 0.6...
Sq. End Mill, Single End, Carb, 0.40mm
Square End Mill, 0.4 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 0.6...
Sq. End Mill, Single End, Carb, 0.40mm
Square End Mill, 0.4 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 0.6...
Sq. End Mill, Single End, Carb, 0.40mm
Square End Mill, 0.4 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 0.6...
Sq. End Mill, Single End, Carb, 0.40mm
Square End Mill, 0.4 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 1.2...
Sq. End Mill, Single End, Carb, 0.40mm
Square End Mill, 0.4 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 1.6...
Sq. End Mill, Single End, Carb, 0.40mm
Square End Mill, 0.4 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 0.6...
Sq. End Mill, Single End, Carb, 0.40mm
Square End Mill, 0.4 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 0.6...
Sq. End Mill, Single End, Carb, 0.50mm
Square End Mill, 0.5 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 0.7...
Sq. End Mill, Single End, Carb, 0.50mm
Square End Mill, 0.5 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 0.7...
Sq. End Mill, Single End, Carb, 0.50mm
Square End Mill, 0.5 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 0.7...
Sq. End Mill, Single End, Carb, 0.50mm
Square End Mill, 0.5 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 0.7...
Sq. End Mill, Single End, Carb, 0.50mm
Square End Mill, 0.5 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 0.7...
Sq. End Mill, Single End, Carb, 0.50mm
Square End Mill, 0.5 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 0.7...
Sq. End Mill, Single End, Carb, 0.50mm
Square End Mill, 0.5 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 0.7...
Sq. End Mill, Single End, Carb, 0.50mm
Square End Mill, 0.5 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 0.7...
Sq. End Mill, Single End, Carb, 0.50mm
Square End Mill, 0.5 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 0.7...
Sq. End Mill, Single End, Carb, 0.50mm
Square End Mill, 0.5 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 0.7...
Sq. End Mill, Single End, Carb, 0.50mm
Square End Mill, 0.5 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 0.7...
Sq. End Mill, Single End, Carb, 0.50mm
Square End Mill, 0.5 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 0.75...
Sq. End Mill, Single End, Carb, 0.50mm
Square End Mill, 0.5 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 1.5...
Sq. End Mill, Single End, Carb, 0.50mm
Square End Mill, 0.5 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 2 mm...
Sq. End Mill, Single End, Carb, 0.50mm
Square End Mill, 0.5 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 1 mm...
Sq. End Mill, Single End, Carb, 0.60mm
Square End Mill, 0.6 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 1.2...