M.A. FORD
Square End Mill, 3/8" Dia., 1" Cut, Carbide
Roughing End Mill, 0.375 in Milling Dia., Uncoated, Straight, Length of Cut 1 in...
Square End Mill, 3/8" Dia., 1" Cut, Carbide
Square End Mill, 0.375 in Milling Dia., Uncoated, Straight, Length of Cut 1 in,...
Square End Mill, 4 Flute, Altima, 1/4
Square End Mill, 4 Flute, Altima, 1/4
Square End Mill, 4 Flute, Altima, 3/16
Square End Mill, 4 Flute, Altima, 3/16
Square End Mill, 4 Flute, Altima, 3/16
Square End Mill, 4 Flute, Altima, 3/16
Square End Mill, 4 Flute, Altima, 3/4
Square End Mill, 4 Flute, Altima, 3/4
Square End Mill, 4 Flute, Altima, 3/8
Square End Mill, 4 Flute, Altima, 3/8
Square End Mill, 4 Flute, Altima, 3/8
Square End Mill, 4 Flute, Altima, 3/8
Square End Mill, 4 Flute, Altima, 3/8
Square End Mill, 4 Flute, Altima, 3/8
Square End Mill, 4 Flute, Altima, 5/8
Square End Mill, 4 Flute, Altima, 5/8
Square End Mill, 4.00mm Dia., 14.00mm Cut
Square End Mill, 4 mm Milling Dia., Uncoated, Straight, Length of Cut 14 mm, Ove...
Square End Mill, 5/16" Dia., 13/16" Cut
Square End Mill, 0.3125 in Milling Dia., Uncoated, Straight, Length of Cut 0.812...
Square End Mill, 5/16" Dia., 13/16" Cut
Square End Mill, 0.3125 in Milling Dia., Altima, Straight, Length of Cut 0.8125...
Square End Mill, 5/32" Dia., 1/2" Cut
Square End Mill, 0.15625 in Milling Dia., Uncoated, Straight, Length of Cut 0.5...
Square End Mill, 5/8" Dia., 1-1/4" Cut
Square End Mill, 0.625 in Milling Dia., Uncoated, Straight, Length of Cut 1.25 i...
Square End Mill, 6.00mm Dia., 25.00mm Cut
Square End Mill, 6 mm Milling Dia., Altima, Straight, Length of Cut 25 mm, Overa...
Straight Flute Drill, 5/32"x 5/8" x 2"
Straight Flute Drill Bit, Drill Bit Size #1, Wire
Straight Flute Drill, 7/32" x 3/4" x 2"
Straight Flute Drill Bit, Drill Bit Size #16, Wire
Straight Flute Drill, 9/32"x3/4" x 2-1/2"
Straight Flute Drill Bit, Drill Bit Size #33, Wire
Straight Flute Drll Bit, Wb Thinned, 1/4in
Straight Flute Drill Bit, Drill Bit Size 1/4 in, 135 Degrees Drill Bit Point Ang...
Straight Flute Drll Bit, Wb Thinned, 1/8in
Straight Flute Drill Bit, Drill Bit Size 1/8 in, 135 Degrees Drill Bit Point Ang...
Straight Flute Drll Bit, Wb Thinned, 3/8in
Straight Flute Drill Bit, Drill Bit Size 3/8 in, 135 Degrees Drill Bit Point Ang...
Straight Shank Drill Bit, Metric, 1.00mm
Jobber Length Drill Bit, Drill Bit Size 1 mm, Drill Bit Point Angle 118 Degrees...
Straight Shank Drill Bit, Metric, 1.55mm
Jobber Length Drill Bit, Drill Bit Size 1.55 mm, Drill Bit Point Angle 118 Degre...